State Regulations

NOTICE BEFORE INSTALLATION

Bradford White direct-vent appliance must be installed by a state qualified or licensed contractor. If you are not properly trained, you must not install this unit.

IMPORTANT: In the State of Massachusetts (248CMR 4.00 & 5.00)

For all side wall horizontally vented gas fueled equipment installed in every dwelling, building or structure used in whole or in part for residential purposes, including those owned or operated by the Commonwealth and where the side wall exhaust vent termination is less than seven (7) feet above finished grade in the area of venting, including but not limited to decks and porches, the following requirements must be satisfied:

1.INSTALLATION OF CARBON MONOXIDE DETECTORS. At the time of installation of the side wall horizontal vented gas fueled equipment, the installing plumber or gasfitter must observe that a hard wired carbon monoxide detector with an alarm and battery back-up is installed on the floor level where the gas equipment is to be installed. In addition, the installing plumber or gasfitter must observe that a battery operated or hard wired carbon monoxide detector with an alarm is installed on each additional level of the dwelling, building or structure served by side wall horizontal vented gas fueled equipment. It is the responsibility of the property owner to secure the services of qualified licensed professionals for the installation of hard wired carbon monoxide detectors.

a.In the event that the side wall horizontally vented gas fueled equipment is installed in a crawl space or an attic, the hard wired carbon monoxide detector with alarm and battery back-up may be installed on the next adjacent floor level.

b.In the event that the requirements of this subdivision cannot be met at the time of completion of installation, the owner shall have a period of thirty (30) days to comply with the above requirements; provided, however, that during said thirty (30) day period, a battery operated carbon monoxide detector with an alarm must be installed.

2.APPROVED CARBON MONOXIDE DETECTORS. Each carbon monoxide detector as required in accordance with the above provisions shall comply with NFPA 720 and be ANSI/UL 2034 listed and IAS certified.

3.SIGNAGE. A metal or plastic identification plate must be permanently mounted to the exterior of the building at a minimum height of eight (8) feet above grade directly in line with the exhaust vent terminal for the horizontally vented gas fueled heating appliance or equipment. The sign must read, in print size no less than one-half (1/2) inch in size, “GAS VENT DIRECTLY BELOW. KEEP CLEAR OF ALL OBSTRUCTIONS”.

4.INSPECTION. The state or local gas inspector of the side wall horizontally vented gas fueled equipment shall not approve the installation unless, upon inspection, the inspector observes carbon monoxide detectors and signage installed in accordance with the provisions of 248 CMR 5308(2)(a)1 through 4.

12

Page 11 Page 13
Page 12
Image 12
Bradford-White Corp TG237E-N(X), TG-237E-N(X)A State Regulations, Important In the State of Massachusetts 248CMR 4.00
Page 11 Page 13

TG-199E-N(X), TG237E-N(X), TG-180E-N(X), TG-150E-N(X), TG-237E-N(X)A specifications

Bradford White Corporation is renowned for its innovative solutions in the water heating and storage sector, offering a range of high-quality products designed for residential and commercial applications. Among its standout offerings are the TG series models, including TG-237E-N(X)A, TG-150E-N(X), TG-180E-N(X), TG-237E-N(X), and TG-199E-N(X). These models are specifically designed to maximize efficiency while providing reliable hot water delivery.

One key feature of the TG series is its high Energy Factor (EF) ratings, which signify exceptional energy efficiency. The models employ advanced technologies that not only reduce energy consumption but also minimize environmental impact. These products typically include a highly efficient burner system that enhances heat transfer, ensuring that users enjoy maximum hot water availability without incurring high utility costs.

Each model is crafted with robust materials, designed to withstand the rigors of everyday use. For example, the tanks are typically built from durable steel and feature an advanced glass lining that protects against corrosion and extends the lifespan of the unit. Additionally, these models are equipped with high-quality insulation that helps retain heat, further improving efficiency.

The TG series also emphasizes user convenience and safety. Many units come with a user-friendly control system that allows for easy temperature adjustments and monitoring. This is complemented by built-in safety features such as automatic shut-off capabilities, helping to prevent overheating or other potential hazards.

Another characterizing aspect of the TG series is its flexibility in installation. These water heaters are designed to fit various spaces and configurations, ensuring that they can meet the needs of different households or commercial facilities. Additionally, some models are compatible with both natural gas and propane, offering versatility in fuel options.

In terms of technology, these Bradford White water heaters include features such as electronic gas control systems that provide precise temperature management, and advanced airflow designs that optimize combustion efficiency. This focus on technology ensures that the TG series is not only reliable but also a smart choice for cost-conscious consumers looking to reduce their energy bills.

In summary, the Bradford White TG series, with models like TG-237E-N(X)A, TG-150E-N(X), TG-180E-N(X), TG-237E-N(X), and TG-199E-N(X), stands out for its robust design, efficiency, and advanced safety features. Whether for residential or commercial use, these hot water solutions continue to meet the evolving needs of consumers while prioritizing reliability and performance.
Top Page Image Contents