Samsung LN40A630M1F Appendix Troubleshooting, Problem Possible Solution, Volume accordingly

Appendix

Troubleshooting

If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips apply, call Samsung customer service at 1-800-SAMSUNG.

Problem	Possible Solution
Poor picture.	Try another channel.
	Adjust the antenna.
	Check all wire connections.
Poor sound quality.	Try another channel.
	Adjust the antenna.
No picture or sound.	Try another channel.
	Press the SOURCE button.
	Make sure the TV is plugged in.
	Check the antenna connections.
No sound or sound is too low at	First, check the volume of units connected to your TV (digital broadcasting
maximum volume.	receiver, DVD, cable broadcasting receiver, VCR, etc.). Then, adjust the TV
	volume accordingly.
Picture rolls vertically.	Check all wire connections.
The picture quality is defective.	Please perform the Picture test in the Self-Diagnostics.
The sound is defective.	Perform the Sound test of the Self-Diagnostics.
The TV operates erratically.	Unplug the TV for 30 seconds, then try operating it again.
The TV won’t turn on.	Make sure the wall outlet is working.
Remote control malfunctions.	Replace the remote control batteries.
	Clean the upper edge of the remote control (transmission window).
	Check the battery terminals.
‘Check signal cable’ message.	Ensure that the signal cable is firmly connected to the PC source.
‘Not Supported Mode’ message.	Check the maximum resolution and connected device’s Video frequency.
	Compare these values with the data in the Display Modes.
Digital broadcasting screen problem.	Please check the digital signal strength and input antenna.
The image is too light or too dark.	Adjust the Brightness and Contrast.
	Adjust the Fine tuning.
Black bars on the screen.	Make sure the broadcast you’re receiving is High Definition (HD).
	HD channels sometimes broadcast Standard Definition (SD) programming,
	which can cause black bars.
	Set your cable/satellite box to stretch or widescreen mode to eliminate the bars.
Picture has a Red/Green or Pink tint.	Make sure the Component cables are connected to the correct jacks.
Closed Captioning not working.	If you are using a Cable/Satellite box, you must set Closed Captioning on the
	box, not your TV.
Snowy picture.	Your cable box may need a firmware upgrade. Please contact your Cable
	company.
Ghosting on picture.	This is sometimes caused by compatibility issues with your cable box.
	Try connecting Component cables instead.
Horizontal bars appear to flicker, jitter	Adjust the Coarse tuning and then adjust the Fine tuning.
or shimmer on the image.
Vertical bars appear to flicker, jitter or	Adjust the Coarse tuning and then adjust the Fine tuning.
shimmer on the image.

English - 86