![](/images/new-backgrounds/1010990/1099043x1.webp)
The Bradford White
SERVICE PROCEDURE VI
Burner Operation Inspection, Adjustment
Cleaning and Replacement
Step 4. Disconnect (unscrew) feedline from the main burner door.
Feedline
Step 5. Remove main burner orifice from feed line (3/8" wrench). Inspect and clean if necessary
Main Burner Orifice
Step 6. Remove pilot assembly, refer to SERVICE PROCEDURE III for cleaning and inspection.
Step 7. Reassemble burner.
Step 8. Reinstall burner and inner door per SERVICE PROCEDURE I, steps 9 through 19.
Step 9. To resume operation, follow the instructions located on the lighting instruction label or the lighting instructions located in the installation and operation manual.
22
22