ASSEMBLING INSTRUCTIONS
Refer to Part numbers in Bradley Smoker External Part List and Internal Component list Diagrams.
How to Assemble the
Bradley Smoker®
1.Remove smoker from box.
2.Take all packaged parts out of smoker.
3.Remove all protective packaging materials from parts.
Install Smoke Generator:
Attach smoke generator (1) to the smoker tower (2). Aim the bisquette burner (F) toward the tower opening. Align smoke generator key holes to smoker tower locating supports (3). Secure the generator by pushing down firmly.
Insert the feed tube (4) on top of the smoke generator and load it with the desired number of Bradley Flavour Bisquettes®. Plug the short power cord
(A)from the smoke generator into the smoker tower.
Set Up Smoker Tower:
Handling of Packaging
All packaging should be discarded, as per the regulations in your area. The box can be used only to store smoker when not in use. The box should not be used as a cover when smoker is in use.
Place drip tray (B) onto the bottom side ladder.
Place cooking racks (C) onto the side ladders above the drip tray. Place rectangular tray ( J) at the bottom of the unit.
Fill the waste pot half full with water and place on the rectangular bottom tray (J) in waste pot position (D).
Plug the longer power cord
To Remove Smoke Generator:
Unplug short power cord. Detach smoke generator from the smoker tower by raising the smoke generator gently upward and pull it outward.
3
