Express® Lavatory System - MG-Series with TouchTime® Control

 

MG-2/TT

Installation Instructions

Installation Instructions continued . . .

Step 7: Connecting electrical and supply tubing

WARNING: MG-2/TT must be connected to 24 VAC Class II plug-in transformer provided. Connection to 110 VAC may cause personal injury and/or damage to electronics. Connection of leads other than shown may cause permanent damage to the switch.

1.Insert the two sprayhead supply tubes into the two solenoid tube connectors by loosening the compression nut and firmly pushing the tubing into the connector until the tubes are fully seated, then re-tighten the compression nut (hand-tight plus two full turns with a wrench) (see Figure 7).

2.Connect the wires per the wiring diagram shown below.

3.Align the mounting screws with slots on the frame. Valve bracket slides down to lock into place.

4.Turn on the water supply to the MG-2/TT Express® and check for leaks.

5.Turn on the electrical power, trigger the TouchTime® push buttons and check for proper function (the timing is electronically controlled and set at 15 seconds).

IMPORTANT: The Vernatherm™ valve is NOT factory-preset. Upon installation, the valve temperature must be checked and adjusted to assure delivery of safe water temperature. Water in excess of 110°F (43°C) may cause scalding.

6.Check the temperature when approximately1.0 GPM water flow is reached and adjust if necessary (the range of the valve is 95°F–115°F (35°C–43°C). To adjust the temperature, first loosen the temperature locking nut with a wrench. Then using a blade screwdriver, turn the adjustment stem counterclockwise to increase the temperature or clockwise to decrease the temperature. Once desired temperature is reached, tighten the nut to prevent temperature change.

7.Reinstall panel to frame with the five Torx-head screws provided (see Figure 3 on page 8).

NOTE: Push button activation takes place only when released, (prevents “hold open” activation).

 

TRANSFORMER

 

 

 

S83-134

 

 

 

 

COMPRESSION

 

 

 

NUT

 

 

 

B BLACK

G BROWN

 

 

LEFT GRAY

 

 

RED

LEFT GREEN

 

 

SUPPLY

 

 

 

TUBE

 

 

 

 

RIGHT GRAY

LEFT

 

 

 

 

 

RIGHT GREEN

BUTTON

 

 

 

 

 

LEFT

LEFT

 

 

GRAY

GREEN

 

GREEN

 

 

 

SUPPLY

 

 

 

TUBE

 

 

 

 

A BLACK

F BROWN

 

H BROWN

 

 

 

F BROWN

 

 

 

G BROWN

 

 

 

E BROWN

VERNATHERM

 

 

D BLACK

THERMOSTATIC

 

 

MIXING VALVE

 

 

 

 

 

C BLACK

 

 

 

B BLACK

 

RIGHT

 

A BLACK

 

BUTTON

 

 

 

Figure 7

 

RIGHT

RIGHT

 

GRAY

GREEN

 

 

 

12

2/8/07

Bradley Corporation • 215-1480 Rev. E; EN 06-915

Page 12
Image 12
Bradley Smoker MG-2/TT installation instructions Connecting electrical and supply tubing

MG-2/TT specifications

The Bradley Smoker MG-2/TT is an innovative and highly regarded appliance in the world of smoking and outdoor cooking. This model is designed to cater to both novice and experienced enthusiasts who are looking for a reliable and consistent way to smoke their favorite meats, fish, and vegetables.

One of the standout features of the MG-2/TT is its dual heating system. This system includes both a smoker and a heating element, allowing for precise temperature control throughout the smoking process. The digital thermostat enables users to set and maintain the desired temperature, ensuring that food is cooked evenly and to perfection. This feature is especially beneficial for longer smoking sessions, where maintaining a consistent temperature is crucial for flavor and texture.

Another key characteristic of the Bradley Smoker MG-2/TT is its patented wood bisquette system. This innovative technology utilizes compressed wood bisquettes that are fed into the smoker automatically. The bisquettes ignite and smolder, producing clean and flavorful smoke without the bitterness that can come from traditional methods. The ability to choose from a variety of wood types, such as hickory, mesquite, or apple, provides users with the flexibility to customize their smoking experience and achieve different flavor profiles.

The construction of the MG-2/TT emphasizes durability and insulation. Built with high-quality materials, the smoker is designed to withstand the elements and provide excellent heat retention. Its insulated walls minimize temperature fluctuations, further enhancing the smoking process. This durability ensures that users can enjoy their Bradley Smoker for many seasons to come.

Additionally, the MG-2/TT is designed for ease of use. The user-friendly digital interface offers simple navigation for temperature adjustments and time settings, making it accessible for users of all skill levels. The spacious interior allows for ample cooking space, accommodating different food items simultaneously.

Cleaning and maintenance are also made easier with the Bradley Smoker MG-2/TT, which features a removable drip tray and easy-access smoke generator. This thoughtful design helps keep the smoker clean and ready for the next culinary adventure.

In summary, the Bradley Smoker MG-2/TT combines advanced technology, durable construction, and user-friendly features to create an exceptional smoking experience. Whether you're smoking ribs, salmon, or vegetables, this versatile appliance ensures flavorful results every time. The Bradley Smoker MG-2/TT stands out as a top choice for smoking aficionados and outdoor cooking lovers alike.