![](/images/new-backgrounds/1041005/4100525x1.webp)
| Express® Lavatory System |
Installation Instructions - For Service Only | |
|
|
Soap Dispenser Maintenance
Step 1: Fill soap dispensers
The two soap valves will dispense vegetable/coconut oil liquid soaps, synthetic detergents, vis- cous lotion soaps, and antiseptic solutions. A
1.Using two screwdrivers (or similar tool), push up on the release tabs located beneath each soap dispenser and pull out the soap tanks from the sprayhead (see Figure 10a).
2.To remove packing dust, rinse out each soap tank with hot water. Shake water out thoroughly and allow to dry.
3.Pour the soap into each soap tank's filler hole (see Figure 10b).
4.After each soap tank is filled, position the soap tanks into the sprayhead openings and push into place.
Figure 10a
Figure 10b
FILLER HOLE
SOAP TANK
Bradley Corporation • | 5/11/04 | 13 |