| Express® Lavatory System |
Installation Instructions - For Service Only | |
|
|
Installation Instructions continued . . .
Step 2: Mount frame to wall
1.Remove the nine
2.Position the frame against the wall, ensuring that it is level.
IMPORTANT: Anchoring the frame to a wall that is not flat may cause the frame to bend. If necessary, install shims to compensate for wall distortion.
3.Ensure that the back of the frame is flat against the wall. If wall is not flat, insert shims behind the frame to ensure that it will not bend when anchored.
4.Once you have positioned the frame such that it is level and flat against the wall or shimmed, use the 3/8" bolts and washers to mount the frame to the wall (see Figure 4).
FRAME
(9)
PANEL
Figure 3
FRAME
3/8" BOLTS AND WASHERS
Figure 4
Installation Instructions continue . . .
Bradley Corporation • | 5/11/04 | 7 |