Braun 32899 Rev A manual Operation $XWRPDWLF.QHHO6\VWHP, Qhho, 2Q2II Switch

OPERATION

$XWRPDWLF.QHHO6\VWHP

Kneeling is the lowering motion of the Rampvan electro-mechanical rear suspension. The kneel sys- tem lowers the rear of the vehicle. Lowering the rear of the vehicle reduces the slope of the ramp.

.QHHO2Q2II)HDWXUHA Kneel On/Off feature is incorporated into the One-Touch electronic control system. This feature provides the option of kneeling the ve- hicle when operating the power door and power ramp. The Kneel On/Off switch must be in the ON position in order for the kneeling system to be activated (see photo at right). See page 12 for addi- tional Kneel On/Off switch details.

The kneel system is automatically activated by the One-Touch elec- tronic control system.

When a control switch is pressed to start the Open functions, the power door opens, the kneel sys- tem lowers the rear of the vehicle and the ramp deploys.

When the Close functions are acti- vated, the vehicle starts to raise at the same time the ramp starts to retract (stow).

Note: If the Rampvan is in the kneeled position and the vehicle is shifted out of Park, the vehicle will raise and you will hear a very rapid pulsing tone (cricket tone).

Note: If the Rampvan is in the kneeled position and the Close functions are activated, the vehicle will raise whether the Kneel On/Off switch is on or off.

Press this switch to ON to enable kneel feature.

.QHHO

2Q2II Switch

Press this switch to OFF to disable kneel feature.

Page 16