What to do if ...
Problem | Situation | Solution |
Shaving Conditioner is leaking | Foil frame replaced incorrectly | Remove foil frame and attach once more, |
|
| ensuring both sides click audibly into |
|
| place. If needed, clean both foil frame and |
| or | shaver head. |
|
| |
| Applicator replaced | Place new applicator on the foil frame, |
| incorrectly | leaving a small gap. With both thumbs |
|
| push applicator right and left until it clicks |
| or | into place. |
|
| |
| Shaver was switched on with | Do not switch on when foil frame is |
| foil frame removed | removed. |
| or |
|
| Cartridge was removed | Do not remove cartridge immediately after |
| immediately after use | use. |
|
|
|
None, or too little Shaving | No cartridge inserted | Insert cartridge. |
Conditioner dispensed with | or |
|
new shaver | Sealing foil not removed from | Remove sealing foil. |
| cartridge |
|
| or |
|
| Scale positioned at «min» | Move scale. |
|
|
|
None, or too little Shaving | Applicator clogged | Replace applicator (before shaving do |
Conditioner dispensed after |
| not use moisturising creme or lotion). |
longer use | or |
|
| Cartridge empty | Insert new cartridge. |
|
|
|
Skin is red or burns | Skin is not used to Shaving | Conditioner contains alcohol. Sensitive |
| Conditioner | skin might require 1 to 2 weeks to get |
|
| accustomed. If your skin shows signs of |
|
| intolerance, discontinue using the Shaving |
|
| Conditioner. |
|
|
|
Shaver is connected to the | Shaver is completely | Leave shaver connected to the mains, |
mains, but is not charging | discharged | push start/stop button once. Shaver will be |
(green LED does not light up) |
| charging when green LED lights up. |
|
|
|
Shaving head does not swivel | Head lock activated | Release head lock. |
|
|
|
Cartridge cannot be removed | Use appropriate tool | |
| removed from cartridge | pull out cartridge. When inserting a new |
|
| cartridge, only remove the silver sealing |
|
| foil. Do not remove the transparent |
|
| tag. |
|
|
|
Water condensation inside the | Differences in temperature | Condensation will disappear after a |
cartridge compartment | when cleaning with water | while and has no effect on the shaver’s |
|
| operation. The electronics section is sealed |
|
| against water. |
|
|
|
10