2 cm
distance |
2 cm |
memo |
click! |
Measuring
For a reliable blood pressure measurement, please follow the instructions below.
To open the cuff, press the release button (F) underneath the cuff closure.
1.Place the monitor housing on the slim side of your bare forearm with the monitor facing up. The distance aid
(H) helps you to keep the required 2 cm distance to your palm line.
2.To close the cuff, hold the appliance against your body. Then take hold of the cuff closure, pull out the cuff and insert the cuff closure in the monitor housing until it locks into place. The cuff will adjust automatically to length needed for your wrist. Once cuff is closed, do not move the appliance anymore. If you want to change the monitor position on your arm, open and close the cuff once again.
3.Press the red on/off button (B).
4.Put the hand with the appliance on the other upper arm as shown. Slowly move the hand upward along the upper arm. Watch the positioning system (A) and move your hand up or down according to the direction of the arrow shown.
7
