5.The positioning system (A) shown on the left and a beep confirm that you have reached the right measuring position. The measurement will start automatically. When the measurement is complete, a beep will sound again, and the reading is displayed:
Upper (systolic) value
Lower (diastolic) value
Pulse
Please note:
•In case of system errors or handling mistakes, the display will show an error code, instead of giving you inaccurate results (for details, please see section «What to do if…»).
•15 seconds after switching on the appliance, the measuring process will start automatically, even if the appropriate measuring position has not been reached.
Turning off
Press the on/off button to turn the product off. Otherwise the product will turn off automatically after 2 minutes.
Memory mode
Your blood pressure monitor can store the readings of
50 measurements. Storing is done automatically after each completed measurement. The memory is
Recalling stored readings
To recall stored readings, first turn the product off, then press the memory button (D). A single push (m or n) will recall the latest reading. The lower display line successively shows memory index and pulse on the one hand and date and time of the respective measurement on the other hand.
Repeatedly pressing the memory button (D) will call up one by one all stored readings:
m
n(+) towards younger readings
8
