1 Description

AEnergy supply/start switch «0» = off,

«1» = energy supply, «start» = starting heat up

BReady indicator dot

CIgnition control window

DTong

E«open» release button for handle

FRound styling brush

GProtective heat resistant cover with safety lock

Before use

2Inserting or changing the Braun «energy cell»

The energy supply must be switched off (switch (A) at position «0»).

Press the «open» release button (E) and pull off the handle.

Insert a Braun energy cell into the handle as shown in the illustration (arrows on energy cell pointing outward). Push the handle with the energy cell back onto the appliance until it snaps into place. The energy level in the cell can be checked through the window at the bottom of the appliance.

Only use Braun energy cells. These are available from the store where this appliance was pur- chased, as well as from authorised Braun Service Agents. The energy cells can be taken out or changed at any time, even if they are only partly filled.

3 Switching on

a)To start the energy supply shift switch (A) up to position «1» (the protective cover (G) must be removed).

b)Wait 3 to 4 seconds.

c)Shift switch (A) further up to the «start» position until you can clearly hear a click.

This starts heating up the appliance.

d)Let the switch slide back to position «1».

e)Red dots shining in the ignition control window indicate that the styler has ignited and is heating up. In the unlikely case that it does not heat up, make sure that the gas is on and push the start switch again.

f)After approx. 1 to 2 minutes, the ready indicator dot (B) turns dark. Only then is the Braun Cordless heated up to the optimum styling temperature and ready for use.

4 Styling

Braun Cordless offers various styling functions:

a)The tong (D) is ideal to create all different kinds of curls, but also to smoothen and straighten small sections of your hair.

b)With the round styling brush attachment (F) you can create soft waves, choppy styles, flicks and curl the hair ends under.

5 After use

The brush attachment (F) can be put on and off as shown.

9

Page 8
Image 8
Braun C Club, C 20 manual Description, Inserting or changing the Braun «energy cell», Switching on, After use, Before use