English
Our products are designed to meet the highest standards of quality, functionality and design. We hope you enjoy your new Braun appliance.
Important
•Do not use the trimmer near or over basins filled with water (e.g. bath tubs, showers etc.).
•Do not wind the cord around the appliance.
•For safety reasons, periodically check the cord for damage and replace it if necessary.
Description
1 | Distance comb | 4 | On/off switch |
2 | Pivoting twin cutter system |
| with beard length selector |
| a beard trimmer | 5 | Memory switch |
| b contour trimmer |
| (for 6 beard length settings) |
| c release buttons | 6 | Pilot light |
3 | Speed selector |
|
|
Technical specifications
Power supply: 100 – 240 V 2 / 50 or 60 Hz (automatic adaptation)
Wattage: 5
Charging your beard trimmer for cordless operation
•For the first 3 chargings: Connect the trimmer to the mains with the on/ off switch on position «0» and charge it for at least 10 hours. The pilot light indicates that the trimmer is connected to the mains.
•Once the trimmer is completely charged, use it without the cord until discharged.
•Then recharge to full capacity again (subsequent charges will take about 8 hours).
•A full charge will give up to 30 minutes of cordless trimming depending on your beard. However, the maximum capacity will only be reached after several charging/discharging cycles.
•Best environmental temperature range for charging is 15 °C to 35 °C.
7
