English
The Oral-B AdvancePower WaterJet removes remaining food particles from between your teeth, while it also effectively massages your gums.
Please read the use instructions carefully before first use.
Important
The appliance must be mounted in a way that it cannot fall into water.
The plug should always be accessible. Periodically check the cord for damage. A damaged or non-functioning unit should no longer be used. Take it to a Braun Service Centre.
Specifications
Max. operating time: 20 minutes
Cooling off time: | 2 hours |
Water capacity: | approx. 500 cm3 |
Description
1Water impact control
2 Motor part
3 Water containter
4 Lid
5 Magnetic ring switch (removable)
6 Hand piece
7 2 attachable jets with different colour markings
8 Wallholder for the jets
9 Double-faced adhesive strip for the wallholder j Wallholder for the unit
Wallholder
The appliance comes with a wallholder j for the unit 2. Use 30 x 3.5 mm semi-round screws with wall plugs, if necessary, to mount the holder to the wall (a). Slide the unit onto the holder from the top.
The wallholder 8 for the jets 7 can be mounted with the double-faced adhesive strip 9. Clean the tiles thoroughly with surgical or methylated spirit first. Then pull of the foil from one side of the adhesive strip and press this side against the back of the wallholder (b). Then pull of the foil from the other side of the strip (c) and press the wallholder firmly against the wall. Wait 12 hours before hanging up the jets to ensure maximum adhesion.
