Switch
The magnetic ring switch 5 on the hand piece turns the WaterJet on and off:
Off: Switch is below the arrow
On: Slide switch over the arrow
The water impact control 1 regulates the impulse pressure: gentle = 2, strong = 8
The water impact is continuously variable and is electronically controlled.
Setting in operation
The cord compartment offers practical storage for the cord (d). You only have to use as much cord as you need to reach the socket. Guide the cord through either the left- or right hand opening of the cord compartment (A/B).
After connecting the unit to a socket, remove the water container 3 and fill it with lukewarm water. Then replace the water container (with the lid 4on) firmly onto the unit (e). Before using the first time, allow the water to run through completely. Take the hand piece 6out of the magnetic holder (f), hold it into the washbasin and turn the WaterJet on.
Using
Fill the water container 3 with water again and replace it firmly onto the unit 2(e). Attach one of the jets 7onto the hand piece
6and let it audibly click in place (g). Select the water pressure you want with the water impact control 1; it is best to start with the gentlest pressure (setting 2), especially if you tend to have bleeding gums or if children will be using the WaterJet.
Bend over the washbasin and guide the jet to your teeth. Then turn the unit on by activating the switch 5. The WaterJet impulses will start in a few seconds. Keep your mouth opened slightly to allow the water to run into the washbasin.
Mono- and multi-jet irrigation
The jet nozzle offers both mono- and
8
