Braun MD 9000 manual English

English

Our products are engineered to meet the highest standards of quality, functionality and design. We hope you thoroughly enjoy your new Braun Oral-B appliance.

The Braun Oral-B Plak Control oral irrigator removes remaining food parti- cles from between your teeth, while it also effectively massages your gums. For this reason, the oral irrigator should always be used after brushing your teeth.

Prior to using any Braun Oral-B appliance we recommend that you carefully read the following use instructions so that you and your family know how to best operate the unit safely.

Caution

Check the cord occasionally for any damage. Should this be the case, unplug the motor part 2 immediately and take the appliance to a Braun Service Centre. A damaged or non-functioning unit may no longer be used.

Description

1Water container

2 Motor part

3 Removable compartment for attachable jets 4

4 Four attachable jets with different colour markings

5 Water impact control

6 Press button for maximum water impact in the on/off switch 7

7 On-/off switch

8 Irrigator handle

9 Cord storage

j Connections for the charging unit of a

plaque remover, Braun Oral-B Plak Control

k Wall holder

l Two screws with wall plugs

Wall holder

Your oral irrigator comes with a wall holder k for the motor part 2. Use the enclosed screws and wall plugs l to mount (a). The two grooves m on the back of the motor part 2 are pushed down onto the hooks n of the wall holder k. The cord storage compartment 9 offers practical storage of the cord. Only use as much cord as you need to reach the socket.

Specifications

Voltage: 220–240 Volt (~) ac, 50–60 Hz

Power intake: 20 Watt (therefore also suitable for shaver sockets)

Max. operatiog time: 20 minutes

Cooling off time: 2 hours

Water capacity: approx. 600 ml

Number of impulses: approx. 500–1000 impulses per minute, continuously adjustable

Switch

Turn on the oral irrigator by pushing the on/off switch 7 up. Turn it off by sliding the on/off switch back to its initial position (i.e. below the arrow).

The water impact control 5 regulates the impulse pressure: gentle = 2, strong = 8. The water impact is continuously variable and electronically controlled. You may press the button 6 in the on/off switch 7 to obtain maximum water impact, inde- pendent of the impact shown (2–8).

By this, even the most resistant food particles can be removed from between the teeth.

Getting started

After connecting the unit to a socket, remove water container 1 and fill with lukewarm water. Then place the water container firmly onto the unit (c). Before using for the first time, allow the water to run through completely. Take the handle

7