Automatic shut-off, After ironing | Braun SI 18.896, SI 18.890

Caution: Hot steam comes out from the preconditioning nozzles.

Spray function

Press the spray button (5).

Dry ironing

Set the steam regulator (6) on position «0» (= steam off).

D Automatic shut-off

(SI 18 895 and SI 18 896 models only)

The «auto-off» mechanism causes a slight rattling noise during ironing. This is normal and in no case indicates a fault of the iron. The red «auto-off» light (9) will flash when the automatic shut-off is activated.

This happens when the iron has rested

–horizontally on its sole plate for about 30 seconds or

–vertically on its heel rest for about 8 minutes.

To turn on the iron again, just move it. When the «auto-off» pilot light stops flashing, the electrical power is on again. The automatic shut-off will be activated approximately 2 minutes after the iron is plugged into a socket.

E Textile Protectors

Textile Protector Plus (11) (only with

SI 18 896, SI 18 895 and SI 18 890 models)

The Textile Protector Plus protects delicate fabrics from heat damage so that you can iron most fabrics without an intermediate cloth. A special coating avoids shiny patches.

With the Textile Protector, you are able to iron delicate fabrics with the temperature setting within the solid red range so that you can use all steam functions your iron offers.

To check the reaction of your fabrics before you start ironing, we recommend that you iron a small section of material on the reverse side. However, in order not to damage the coating, avoid ironing over e.g. zippers, metal buttons/rivets or strass with the Textile Protector Plus attached. After having attached the Textile Protector, wait about 1 1/2 minutes before you start ironing.

Soft Textile Protector (12) (only with

SI 18 896 model)

The Soft Textile Protector ensures an increased heat protection and utmost care for most delicate fabrics thanks to its specially designed SoftTouch cushion. Even most delicate, ironable* fabrics are protected against heat damage and shiny patches are avoided.

With the Soft Textile Protector attached, you can iron all ironable fabrics without an intermediate cloth. The Soft Textile Protector is perfectly suited for touching up e.g. creases of delicate business suits without having to use an ironing cloth.

With the Soft Textile Protector, you are able to iron delicate fabrics with the temperature setting within the solid red range so that you can use all steam functions your iron offers.

However, in order not to damage the SoftTouch cushion, avoid ironing over e.g. zippers, metal buttons/rivets or strass with the Soft Textile Protector attached.

(* in order to know whether a piece of garment is ironable, please refer to its care label.)

F After ironing

Unplug the iron and turn the steam regulator to position «0». To prolong the life of the iron, empty the water tank. Store the cool iron in a dry place always standing on its heel rest.

G Maintenance and cleaning

To clean the sole plate, use steel wool. Never use a scouring pad, vinegar or other chemicals. To clean the soft material on the handle, use soapy water.

H Cleaning the anticalc valve

The anticalc valve located on the lower end of the steam regulator has to be decalcified regularly (e.g. whenever steam development is insufficient). For this, the water tank has to be empty.

Removing the steam regulator with the anticalc valve

Turn the steam regulator clockwise towards the steam setting «6». Keep on turning firmly beyond the resistance until the steam regulator is lifted. When positioned at x, pull it out vertically.

Do not touch the anticalc valve at its lower end. Immerse the anticalc valve in vinegar (not vinegar essence) or lemon juice for a minimum of 30 minutes. Brush off remaining residues and rinse under running water (fig. H, 1-7).

Re-inserting the steam regulator When re-inserting the steam regulator, make sure the steam regulator base still points on setting x (fig. H, 8). Firmly push down the steam regulator until it turns back to setting «6» (fig. H) where it catches.

Notice: The iron must never be used without steam regulator.

SI 18.895, SI 18.830, SI 18.720, SI 18.890, SI 18.896 specifications

Braun, a pioneer in the field of home appliances, offers an impressive range of steam irons, including the SI 18.896, SI 18.890, SI 18.720, SI 18.830, and SI 18.895 models. Each of these irons is designed to provide efficiency and outstanding performance, ensuring that laundry days are less of a chore.

The Braun SI 18.896 is well-regarded for its precision and powerful steam output. This model features a unique 3D soleplate, which enhances gliding on all fabric types while providing optimal steam distribution. The anti-drip system prevents water stains on clothes, making it a reliable choice for delicate fabrics. Additionally, its adjustable temperature settings cater to various clothing materials, providing versatility.

The SI 18.890 stands out with its Eco mode, allowing users to save energy without compromising on performance. The steam boost feature offers extra power, making it easy to tackle even the toughest creases. This model emphasizes user comfort with a lightweight design and ergonomic handle, ensuring fatigue-free handling during prolonged use.

Next in the lineup is the Braun SI 18.720, which offers innovative technology with its Optimal Temperature feature. This system automatically adjusts the temperature and steam output according to the fabric type, eliminating the guesswork involved in ironing. Users can confidently move between different textiles without the fear of scorching, thanks to this intelligent feature.

The SI 18.830 is crafted for the modern user, with a sleek design and advanced steam technology. It produces a continuous steam output that penetrates fabrics deeply for a wrinkle-free finish. The vertical steam function is perfect for hanging garments, curtains, or upholstery, adding to its versatility. Furthermore, the easy-to-fill water tank makes it convenient for longer ironing sessions.

Lastly, the SI 18.895 boasts a robust construction and an impressive steam shot capability. The ceramic soleplate not only ensures smooth gliding but also provides superior durability. This model includes a self-cleaning feature that helps maintain performance over time. Users can enjoy a hassle-free ironing experience thanks to the smart features that Braun integrates into its designs.

Together, these models exemplify Braun's commitment to innovation and quality, catering to a wide range of ironing needs. Whether it's for everyday wear or special occasion garments, these steam irons simplify the process and deliver professional results.

Braun SI 18.896, SI 18.890, SI 18.720 Automatic shut-off, After ironing, Maintenance and cleaning

Models: SI 18.895 SI 18.830 SI 18.720 SI 18.890 SI 18.896