You can start your toothbrush by pressing the on/off button (b). To avoid splashing, guide the brushhead to your teeth before switching the appliance on.
Bl- |
raO |
Oral B-
Connecting and charging
Your toothbrush has a waterproof handle, is electrically safe and is designed for use in the bathroom.
To assemble the base station (h) as a charging unit, detach the base plate (g) first (1, page 3). Place the charging ring into the base station and attach the base plate as shown (2 and 3, page 3). Then insert the protective cover (i) on the back of your base station (see diagram 4, page 3).
•Plug the SmartPlug into an electrical outlet and place the toothbrush handle (d) on the charging unit. A battery symbol should appear in the handle display (e). The battery symbol will fill up while the handle is being charged. Once the handle is fully charged, the battery symbol is completely filled with four bars. A full charge takes at least 12 hours to complete and allows for approximately two weeks of regular brushing (twice a day, 2 minutes).
Please note: If the battery symbol is not displayed immediately, continue charging. It will appear in
•When the rechargeable battery is low, the battery symbol with one remaining bar starts flashing. Your toothbrush will slow down and then stop. When the battery is fully discharged, the empty frame of the battery
symbol flashes. It will then need a
charge before you can use it for a
•For everyday use, the toothbrush handle can be stored on the charging unit to maintain it at full power. There is no risk of overcharging the battery.
•To maintain the maximum capacity of the rechargeable battery, unplug the charging unit and fully discharge the handle by regular use at least every 6 months.
For electric specifications, see printing on the SmartPlug.
Personalizing the timer
You can choose between the «Professional» or
The
| c | 3 |
|
|
| e |
|
| |
| 0 |
| ||
0 | s | s | ||
| e | |||
|
|
| c | |
3 |
|
|
| |
c |
|
|
| 3 |
e |
|
| ||
s |
| s | 0 | |
| 0 | e |
| |
| 3 |
|
| |
| c |
|
|
Both timers memorize the elapsed brushing time, even when the handle is briefly switched off during brushing. Only when pausing longer than 30 sec. the timer resets to the initial starting point.
6