Switching off the sleep timer

1For switching off the sleep timer before the set time, switch off device
with »ON/OFF« or press and hold down »SLEEP«.
– Display: »љ« and the remaining time stop glowing.
– The device switches off.

Setting the reminder timer

1Activate the function with »NAP«.
– Display: »60« and »NAP« flash.
– The circular snooze LED flashes.
2Confirm reminder time with »S« or »A« (in 10 minute intervals from
120 to 10 minutes) and confirm with »NAP«.
– Display: »NAP« the remaining time until the reminder, e.g. »36«.
– After the set time has expired, a signal tone sounds (for max. 90
minutes).
– Display: »00« flashes briefly and then stops with »NAP«.
3To switch off the signal tone, press and hold down »NAP«.

Switch off reminder timer

1To switch off the reminder timer before the set time, press »NAP« and
hold it down.
– Display: » NAP« and the remaining time until the reminder stop
glowing.
Operation with the projector
You can use the supplied projector to project the current time to the wall or
the ceiling.
1Connect the projector cable to the socket » « (left side of the device).
– The light in the projector lights up.
2Direct the body of the projector in the desired angle.
3Set the focus of the projection by moving the lens holder.
– The current time can be seen on the wall or on the ceiling.
4Switch the projector off and on by using »PROJECTOR«.
Note:
If you are not using the projector for longer periods of time, take it off
the device.
OPERATION__________________________________________
AL 1
ON
/
12:00
ENGLISH
31