ENGLISH
27

Signal alarm

1Press »ON/OFF« to switch the device to stand-by mode.
2To activate the first alarm programme, press and hold down »AL 1«.
– Display: e.g. »ALARM ɷ«, the alarm time (e.g. »6:00«) and the
next alarm day.
3Press »AL 1« twice to set the programme.
– Display: »ALARM 1ɷ« flashes.
4If necessary, select signal alarm (»e«) with »S« or »A«.
5To set and confirm the alarm time, repeat steps 8to 16 of the “radio
alarm” section.

Radio and signal tone alarm

1Press »ON/OFF« to switch on the device.
2Use »1/6 ... 5/10« to select the desired radio station.
– The requested radio station is played.
3Set the desired maximum volume using »+ VOLUME –«.
4Press »ON/OFF« to switch the device to stand-by mode.
5To activate the first alarm programme, press and hold down »AL 1«.
– Display: e.g. »ALARM ɷ«, the alarm time (e.g. »6:00«) and the
next alarm day.
6Press »AL 1« twice to set the programme.
– Display: »ALARM 1ɷ« flashes.
7If you have not already selected it, select the radio and signal tone
alarm type (»eɷ«) with »S« or »A«.
8To set and confirm the alarm time, repeat steps 8to 16 of the “radio
alarm” section.
Note:
You will be awoken with the radio programme at the set alarm time;
approx. 9 minutes later the signal tone will sound. If you interrupt the
signal tone with »SNOOZE«, you will still hear the radio programme.
Deleting all settings (Reset)
If the electronic system of your device becomes blocked (as the result of
static electricity from the floor carpet or storms, for example), the device can
be reset to its original condition.
1Press »RESET« (at the base of the casing) with a sharp object and hold
down for about 2 seconds.
– The time, date, alarm times and radio settings are deleted.
1
1
SETTINGS ______________________________________________