Pre-Lift Operation Notes and Details
Lift Features (continued)
After the platform is fully lowered (entire platform reaches the ground), the roll stop must remain in the fully unfolded
The lift operator or attendant must be certain the entire platform reaches and rests safely on the ground.
(ramp) position until the entire wheelchair has crossed the roll stop when loading or unloading at ground level. When raising the platform, the lift operator must view the platform as it raises to ensure the roll stop rotates to the vertical position.
Bridging: The VL955 incorpo- rates a bridging feature. This feature stops the down travel of the platform if the outboard end of the platform contacts a raised surface (such as a curb), prevent- ing the operator from lowering the inboard end of the platform.
Handrails: Dual handrails are provided for wheelchair passen- ger (or standee) use. The handrails automatically unfold to the deployed position when the
platform unfolds and fold auto- matically to the stowed position when the platform folds. The passenger may choose to grip the handrails when on the lift platform (if applicable).
Note: The right (front) handrail is equipped with an UP/DOWN control switch (details in Control
WARNING
Discontinue lift use immediately if any lift component does not operate properly. Failure to do so may result in serious bodily injury and/or property damage.
Page 16
