![](/images/new-backgrounds/1308746/30874653x1.webp)
M
O
UP
Lift Operating Instructions
To Load Passenger:
1. Load passenger onto platform facing outward and lock wheel- chair brakes.
Note: Roll stops must be fully unfolded (ramp position) until the entire wheelchair has crossed the roll stop. See Photos K and L.
2.Press red UP switch until platform stops (reaches floor level). Re- lease switch.
Handrail Switch: Slide knob out to UP position.
Note: Roll stop must be UP before raising platform. Platform will raise above ground level approximately two inches before the roll stop reaches the fully UP position.
N
approximately 2" |
P |
Page 25