Bravetti F2000 Using Solid Fat, Pre-Heating, Using for the First Time, Operation Instructions

Models: F2000

1 7
Download 7 pages 33.53 Kb
Page 4
Image 4
Using Solid Fat

OPERATION INSTRUCTIONS

OPERATING INSTRUCTIONS

Using Solid Fat

Pre-Heating

Read all the sections of this booklet and follow all the instructions carefully.

Warning: It is NOT RECOMMENDED to

put solid shortening in the Oil Container or the Frying Basket.

If using solid vegetable shortening, melt it first in a separate pan and then very carefully pour the melted fat into the Oil Container.

Previously used solid vegetable shortening which has curdled and hardened in the Oil Container should be removed from the Oil Container and melted in a separate pan before reusing.

Caution: If you try to melt the solidified fat in the Oil Container, there is a risk of warm melted fat suddenly sputtering from below through the still solid top layer of fat. Therefore use only the following procedure:

Make sure the fat is at room temperature. If the fat is very cold, there is a greater risk of splashing.

Using a fork, carefully make some holes in the fat. Make sure the Cover is securely closed while fat is melting. Heat fat slowly - on lowest temperature

setting.

Warning: Never plug in the Deep Fryer before filling with oil to specified level. Always make sure Deep Fryer is properly and completely assembled before using or plugging into wall outlet.

Important: Ensure the Control Panel is fitted correctly to the main unit otherwise the unit will not function. This is not a defect. This product is fitted with a safety switch to prevent the unit from turning on accidentally.

Set the required temperature by turning the Temperature Control Knob. – The temperature is adjustable from 155 °F to 375 °F.

Warning: Never plug in the Deep Fryer before filling with oil. (See How to Use Your Deep Fryer.) Always unplug the appliance when not in use.

Make sure the oil level in the Oil Container is between the "minimum " and " maximum " lines inside the Oil Container.

The Frying Basket should not be immersed in the oil during the pre- heating.

Close Cover.

Plug the appliance into a 120-volt outlet.

Press the On/Off Switch to ON. The Power Indicator Light will come on. It’s showing that the power is on.

Turn the Temperature Control Knob to the desired temperature setting.

Filling the Oil Container With Oil Warning: Never plug in the Deep Fryer

before filling with oil to specified level. Always make sure Control Panel is securely in place in the body and the Heating Element is inside the oil in the container before plugging in.

Use blended vegetable oil, pure corn oil or canola (rapeseed) oil. Do not use olive oil, margarine, lard or drippings.

The oil level must always be maintained between the minimum and the maximum levels marked inside the oil container. (See Fig. 2) Check the oil level before each use. For best results, keep the oil close to the maximum level (10 cups/2.5 liters). Never mix different oils and fats together. Do not mix old and new oil.

Using for the First Time

Warning: Never plug in the Heating Control Panel when it is not properly installed in the fryer body. Do not immerse the Control Panel, Power Cord or plug in water or any other liquid.

Prior To First Use, Clean The Unit Thoroughly

Warning: Always let the fryer cool completely for 2 hours before taking it apart for cleaning. Never carry or move the Deep Fryer with hot oil inside. Before cleaning, always make sure the unit is unplugged from the wall socket and turned Off”

All components except the electrical parts (Power Cord, Control Panel with Heating Elements and Main Enclosure), can be washed in warm soap water. Dry thoroughly before use.

Use Basket Handle to remove the Frying Basket. Always make sure the Basket Handle is securely attached to the basket. Attach the handle to the Frying Basket, insert the metal part of the handle inside the metal bracket on the Frying Basket. (Fig. 3)

Lift the Control Panel with Heating Element out of its slots by pushing it up from the bottom with one hand while holding the body of the Deep Fryer with your the other hand.

Remove the Oil Container.

Clean the Oil Container and the Frying Basket with hot water, dishwashing liquid or other non-poisonous detergent and non-abrasive sponge.

Fig. 3

Press here to release handle shafts from basket

Warning: This unit should not be used to boil water.

Warning: Never immerse the Control Panel in water or any other liquids.

Warning: All components must be completely dried before filling with oil or using. Special care must be taken to ensure the washable Oil Filter located in the Cover is completely dry, otherwise the filter will not function properly and may lead to steam being trapped within the fryer during use.

Warning: Never exceed "MAX" line when filling the basket with food. (Fig. 4)

Max level for oil

Fig. 4

Warning: Never use the Break Away Power Cord to turn Deep Fryer Off . Always turn unit Off by using the On/Off Switch first. Disconnect Power Cord from wall outlet. Use only the Power Cord provided with the Deep Fryer. Any use of another magnetic cord could cause fire, electric shock or injury.

5

6

Page 4
Image 4
Bravetti F2000 Using Solid Fat, Pre-Heating, Using for the First Time, Prior To First Use, Clean The Unit Thoroughly