OPERATION

Play the Keyboard

ENGLISH

[1]To turn on the keyboard, set the POWER to ON. The display will illuminate.

Note:

To save power while unit is not in use, it will notify you with bell sound every 5 minutes.

[2]Adjust the volume to the desired level. Repeatedly press volume up or volume down to increase or decrease the volume. The keyboard's volume ranges from 0 (no sound) to 10 (maximum), and the current volume level appears on the display.

Playing the Demo Song

You can listen to any of the 50 songs listed on the right side of the panel.

[1]Press SONG. The display appears SONG along with the number of the current song.

Note:

The keyboard pre-selects the tune “Canon” (No. 01) each time the powered ON.

[2]Choose a song from the SONGS list and enter its two-digit number on the keypad, or, press -+” to move to the lower or higher numbered song.

[3]Press START/STOP to start playing the song.

A “score” to display the notes that are playing is located in the center of the display.

A “keyboard” is displayed fingering and which keys are pressed (bottom of the display)

The black dots next to the song number display the beat count in the measure.

The musical chord is displayed at the left corner of the display.

[4]To change the tempo, repeatedly press TEMPO UP or TEMPO DOWN. The current tempo setting appears.

[5]To select a different song, repeat step 2. To stop, press START/STOP.

Using Demo

To play a demo song one by one (in order from the selected starting point), press DEMO. To stop the demo, press DEMO again.

E06

Page 6
Image 6
The Singing Machine SMI-1420 manual Operation, Play the Keyboard, Playing the Demo Song, Using Demo