Before Using Your Microwave Oven
Installing Your Microwave Oven
•Make sure that all packaging materials are removed from the oven.
•Warning: Check the microwave oven for any damage, such as misaligned or bent door, damaged door seals and sealing surface, broken or loose door hinges, loose latches and dents inside the cavity or on the door. Contact customer service at 1 (800)
•The microwave must be placed on a flat, stable surface to hold its weight and the heaviest food likely to be cooked in the oven.
•Do not place the oven where heat, moisture or high humidity are generated or near combustible materials.
•Allow at least 4 inches (10 cm) of space at the top, sides and back of the oven for proper ventilation. Do not cover or block any openings on the appliance. Do not remove the feet of the microwave.
•For safety purposes this microwave oven must be plugged into a 20 Amp circuit. No other electrical appliance or lighting circuits should be on this line. If in doubt, consult a licensed electrician.
•The voltage used at the wall receptacle must be the same as specified on the oven rating plate. Use of a higher voltage is dangerous and may result in a fire or other type of accident causing oven damage. Low voltage will cause slow cooking. In case your microwave oven does not perform normally in spite of correct voltage, remove and reinsert the plug. If problem continues, try another outlet or call customer service at 1 (800)
•Do not operate the microwave oven without the glass turntable or turntable drive plate in their proper positions. Never place the glass turntable upside down in the microwave.
•Make sure that the power supply cord is undamaged and does not run underneath the microwave oven or over any hot or sharp surface.
•Microwave oven operation may interfere with TV or radio reception. If there is interference, it may be reduced or eliminated by:
a.Clean door and sealing surface of the oven.
b.Reorient the receiving antenna of the radio or the TV.
c.Plug the microwave into a different outlet so that the microwave oven and the receiver are on different branch circuits.
d.Relocate the radio or the TV.
•This microwave should not be built into cabinetry or mounted on a shelf above an electric or gas range.
•Wash all removable parts such as the glass turntable, turntable ring and metal rack before using and let dry completely before placing back into the microwave oven.
Child Lock
This is a safety feature that prevents unwanted oven operation, such as use by children. Once the child lock is set, no cooking can be done. To set the child lock, press and hold the “Stop/Clear” button until you hear a beep, and the lock indicator symbol will appear on the digital display.
To cancel the child lock, press and hold the “Stop/Clear” button until you hear a beep, and the lock indicator will disappear. The oven is now ready for use.
Setting the Clock
When the microwave oven is connected to a power source the digital display will have “0:00” on it, and the buzzer will ring once.
Because the clock works in a
1.Press the “Clock “ button on the control panel, and “00:00” will be displayed.
2.Press the numbers “1” - “2” - “1” - “2” on the key pad to enter the clock time.
3.Press “AM/PM” to choose either AM or PM.
Note: If neither AM or PM is selected, then it will be AM as default.
4.Press the “Clock” button to confirm the time setting. “:” will flash, and the time will light.
Pre-Set
Use this function to set your oven to start cooking automatically at a
1.Input one or two cooking programs you would like to use.
Note: Defrost by Weight or Defrost by Time cannot be programmed within the
2.Press
3.Press the number keys on the control panel to set a future time that you would like to cook at. Press “AM/PM” to specify whether the time is AM or PM.
Important: Please note that in order for this feature to work accurately you must have programmed the clock on the microwave oven to the right time (A.M. and P.M. included).
Note: Because the clock works in a
6
