BreatheAudio owner manual BA-200Front Panel, BA-200Back Panel, Control, Audio

MODEL BA-200

HIGH EFFICIENCY 200 WATT STEREO AMPLIFER

POWER STAND BY ACTIVE PROTECT

1 2 3 4

BA-200 Front Panel

1.Power Button:This button manually supplies power to the amplifier

2.STAND BY LED: When lit, this LED (light emitting diode) indicates that the BA-200 is plugged into an AC outlet.

3.ACTIVE LED:When lit, this LED indicates that the amplifier is in normal amplification mode.

4.PROTECT LED:When lit, this LED indicates that the amplifier has overheated or is experiencing an external short in the audio signal, causing it to shut down.

MODEL BA-200

HIGH EFFICIENCY 200 WATT

STEREO AMPLIFIER

120V 60Hz 250W FUSE: T3AL 250V

www.breatheaudio.com Cincinnati Ohio USA

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK. DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE

AVERTISSMENT: ARIN D EVITER LES DANGERS D INCENDIE ETD ELECTROCUTION, NE JPAS EXPOSER

CET APPAREIL A LA PLUIE NIAL HUMIDITE.

INPUT

CONTROL

AUDIO

	SPEAKER
OUTPUT POWER
	8 OHM: 70W X 2
	4 OHM: 100W X 2
	LEFT	RIGHT
-	+ -	+

USE ONLY WITH 250V FUSE

INTE RTEK

CONFORMS TO

CM UL STD. 60065

CERTIFIED TO

CUS CAN/CSA STD.

3033118 C22.2

	1	2	3	4
BA-200 Back Panel
1. Control:	This mono 3.5 mm mini jack is the voltage trigger that powers on the BA-200 when 3 - 30 volts are present.
2. Audio:	This stereo 3.5 mm mini jack receives an audio signal from an external source such as
	the BreatheAudio Elevate Audio Distribution System.

3.Speaker Output: This amplified output provides 100 watts per channel audio output to external speakers.

4.AC Power:The detachable AC power cord can be plugged into any grounded AC power source.

Page 4