guides you through every step of your workout; high- energy music provides added motivation. To purchase and download iFIT.com MP3 programs, go to www.iFIT.com. To purchase iFIT.com CDs or video- cassettes, call
With the treadmill connected to your computer, you can also go to www.iFIT.com and access iFIT.com programs directly from our Web site. See
www.iFIT.com for more information.
To use the manual mode of the console, follow the steps beginning on page 13. To use a preset program, see page 16. To create and use a custom program, see pages 17 and 18. To use a pulse pro- gram, see page 19. To use an iFIT.com MP3, CD, or video program, see page 23. To use an iFIT.com program directly from our Web site, see page 25.
To operate the personal television, follow the steps beginning on page 26. IMPORTANT: For the televi- sion to operate properly, an antenna, a CATV cable, or a VCR must be connected to the 75 ohm antenna terminal on the treadmill.
HOW TO TURN ON THE POWER
Plug in the power cord (see page 11).
Next, locate the reset/off |
|
|
|
|
|
|
|
|
|
|
|
| |
circuit breaker near the |
|
|
|
|
|
|
power cord. Make sure |
| Reset |
|
|
|
|
|
|
|
|
| ||
| Position |
|
|
|
| |
that the circuit breaker is in |
|
|
|
|
| |
|
|
|
|
|
| |
the reset position. |
|
|
|
|
|
|
|
|
|
|
|
|
|
Stand on the foot rails of the treadmill. Find the clip at- tached to the key (see the drawing on page 12) and at- tach the clip securely to the waistband of your clothes. Next, insert the key into the console. After a moment, the screen will light. Test the clip by carefully taking a few steps backward until the key is pulled from the console. If the key is not pulled from the con- sole, adjust the position of the clip as needed.
HOW TO USE THE MANUAL MODE
1 Insert the key into the console.
See HOW TO TURN ON THE POWER at the left.
2 Designate yourself as user A, B, C, or D.
The console can save settings for up to four differ- ent users. To designate yourself as user A, B, C, or D, press the Personal Settings button labeled A, B, C, or D. When the button is pressed, any settings that you have saved will automatically be selected, and the program that was selected the last time you pressed the Save button will auto- matically be reselected.
3 Select the manual mode.
If the manual mode is not selected, press the Programs button repeatedly until the words “Manual Mode” appear on the screen.
4 Start the walking belt.
To start the walking belt, press the Start button, the Speed increase button, or one of the twelve
If the Start button or the Speed increase button is pressed, the walking belt will begin to move at 1 mph. Change the speed of the walking belt as de- sired by pressing the Speed increase and de- crease buttons. Each time a button is pressed, the speed setting will change by 0.1 mph; if a button is held down, the speed setting will change in in- crements of 0.5 mph. Note: After the buttons are pressed, it may take a moment for the walking belt to reach the selected setting.
If one of the
To stop the walking belt, press the Stop button. If the time is displayed on the screen, the time will begin to flash. To restart the walking belt, press the Start button, the Speed increase button, or one of the
Note: The speed of the treadmill can also be con- trolled with the remote control. See HOW TO USE THE REMOTE CONTROL on page 28.
13
