BreatheAudio NTL24950

Adjust the cushioning system as desired.

See step 6 on page 14.

Select a display mode and follow your

progress with the exercise information on the

screen.

See step 7 on page 14.

Measure your heart rate if desired.

See step 8 on page 15.

Turn on the fans if desired.

See step 9 on page 15.

When you are finished exercising, remove the

key from the console.

See step 10 on page 15.

HOW TO CREATE A CUSTOM PROGRAM

Insert the key into the console.

See HOW TO TURN ON THE POWER on page

13.

Identify yourself as user A, B, C, or D.

See step 2 on page 13.

Select one of the custom programs.

To select a custom program, press the Programs

button repeatedly until the words “My Design #1 ,”

“My Design #2,” “My Design #3,” or “My Design

#4” appear on the screen.

Note: If the custom program has not yet been

designed, a program time of three minutes will

appear on the screen. If the program time is

more than three minutes, see HOW TO USE A

CUSTOM PROGRAM on page 18.

Press the Start button or the Speed increase

button and program the desired speed and in-

cline settings.

A moment after the button is pressed, the walking

belt will begin to move. Hold the handrails and

begin walking.

Each custom program is divided into one-minute

segments. One speed setting and one incline set-

ting can be programmed for each segment. To

program a speed setting and an incline setting for

the first segment, simply adjust the speed and in-

cline of the treadmill as desired by pressing the

Speed and Incline buttons.

When the first segment of the program ends, a se-

ries of tones will sound and the current speed set-

ting and the current incline setting will be saved in

memory. Program a speed setting and an incline

setting for the second segment as described

above.

Continue programming speed and incline settings

for as many segments as desired; custom pro-

grams can have up to forty segments. When you

are finished with your workout, press the Stop but-

ton twice. The speed and incline settings that you

have programmed and the program time will then

be saved in memory.