22

TROUBLESHOOTING GUIDE

∙ GLASS “SOOT’S” UP AT A VERY FAST RATE

∙ FLAME IS LAZY, DARK, AND HAS BLACK TIPS

∙ AFTER STOVE HAS BEEN ON FOR A WHILE, THE BURNPOT OVERFILLS

Possible Causes:

Possible Remedies:

 

 

 

1.

Stove or vent pipe is dirty, which restricts airflow through the

Follow all cleaning procedure in the maintenance section of the

 

burnpot.

owner’s manual.

 

 

 

2.

Vent pipe installed improperly.

Check to make sure the vent pipe has been installed according to

 

 

the criteria in the owner’s manual.

 

 

 

3.

Air damper is set too far in (closed) for a higher setting.

Pull the damper knob farther out away from the side of the stove and

 

 

try to burn the unit again.

 

 

 

4.

Burnpot holes are blocked.

Remove the burnpot and thoroughly clean it.

 

 

 

5.

Air damper is broken.

Visually inspect the damper assembly. Make sure the damper plate

 

 

is attached to the damper rod. When the damper rod is moved the

 

 

plate should move with it.

 

 

 

6.

Blockage in air intake pipe.

Visually inspect the air intake pipe that leads into the burnpot for

 

 

foreign material.

 

 

 

7.

Circuit board malfunction.

Time the fuel feed light at each setting (after the stove has

 

 

completed the startup cycle). Make sure the times match the auger

 

 

timing chart. If the auger motor runs constantly, the board is bad.

 

 

 

8.

Combustion blower is not spinning fast enough.

Test the RPM on the blower after the blades have been cleaned.

 

 

The RPM should be approximately 3000 RPM.

 

 

 

9.

Bad Pellets

The brand of pellets or the batch of pellets that are being used may

 

(Applies to GLASS “SOOT’S” UP AT A VERY FAST RATE Only)

be of poor quality. If possible, try a different brand of pellets. You

 

 

might also want to try a brand that is made from a different type of

 

 

wood (softwood vs. hardwood). Different woods have different

 

 

characteristics when being burned.

 

 

 

10.

The trim setting on the low feed rate is to low

Use the “Reset Trim” button to increase the low feed rate setting. If

 

(Applies to GLASS “SOOT’S” UP AT A VERY FAST RATE Only)

the 1 & 4 are on, the stove is currently on the lowest setting. If only

 

 

the 1 light is on, the stove is in the default (medium) setting. If the 1

 

 

& 5 lights are on, the stove is in the high trim setting for the low feed

 

 

rate. If the stove is being burned on one of the two lower settings,

 

 

advance to the next trim setting and try burning the stove.

 

 

 

Page 21 Page 23
Page 22
Image 22
Breckwell P2700, Breckwell Hearth Products LUXURY SERIES owner manual Troubleshooting Guide
Page 21 Page 23

Breckwell Hearth Products LUXURY SERIES, P2700 specifications

The Breckwell P2700 is a top-tier pellet stove from the esteemed Breckwell Hearth Products Luxury Series. This model is designed to offer not only efficient heating solutions but also to enhance your living space with its elegant design. The P2700 is ideal for homeowners seeking both functionality and aesthetic appeal in their heating equipment.

One of the standout features of the Breckwell P2700 is its high heat output capability, which allows it to efficiently heat larger areas. With a maximum output of up to 50,000 BTUs, this stove can easily warm rooms and open-concept spaces, making it perfect for residential environments. This robust performance is paired with adjustable heat settings, providing users with the ability to control the temperature according to their comfort levels.

The P2700 brings the latest technology to the forefront with its advanced electronic control system. This system features a programmable thermostat that allows homeowners to set specific heating schedules tailored to their lifestyles. Additionally, this model is equipped with a digital display that provides real-time information on the stove’s operation, including temperature settings and pellet feed rates.

Breckwell has also prioritized user convenience with the P2700. The integrated hopper can hold up to 60 pounds of pellets, which means less frequent refueling and uninterrupted heating sessions. The hopper is designed for easy access, and the unit features a convenient cleaning system to streamline maintenance. With a simple pull of a lever, users can remove ash and debris, ensuring that the stove operates at peak efficiency.

Another noteworthy characteristic of the Breckwell P2700 is its environmentally friendly design. Pellet stoves are known for producing low emissions compared to traditional wood-burning stoves, and the P2700 is no exception. It meets stringent EPA standards, making it a responsible choice for eco-conscious consumers.

The aesthetic appeal of the P2700 cannot be overlooked. With its sleek, modern design and choice of finishes, it seamlessly integrates into any décor. The large viewing window offers a captivating view of the flames, creating a warm, inviting ambiance in any room.

In summary, the Breckwell P2700, part of the Luxury Series, stands out as a powerful, efficient, and stylish heating option. With its high BTU output, advanced technology, user-friendly features, eco-friendly performance, and elegant design, it represents an exceptional choice for anyone looking to enhance their home’s comfort and warmth.
Top Page Image Contents