![](/images/new-backgrounds/1054924/5492413x1.webp)
RPX ASSEMBLY INSTRUCTIONS
Installing Fan Housing to Tank. Step 3 of 5.
All holes and fasteners will need to be sealed to ensure there are no water leaks outside the cooler.
"Virginia" Sealing Putty has been supplied for this task.
Place Sealing Putty to Base Frame Assembly. Clear hole before fitting channel.
Base Frame Assy.
Secure Base Channel to Base Frame.
BOLT | NUT | WASHER |
M8x30 | M8 | 8x19mm |
P/N0 628257 | P/No 628288 | P/No WAS163 |
At this stage do not fully tighten bolts.
Refer to notes on Page 17.
Repeat process for other ends of Base Channels.