Bretford LAP30EULBA manual Parts List, Tools Required, E-Unitrepositioning Front To Rear, Step

LAP30EULBA

LAP30EULFR

NOTEBOOK CART ASSEMBLY

WITH TIMER

Assembly Instructions for:

INTERIOR E-UNIT

REPOSITIONING / REPLACEMENT

AND

TIMER REPLACEMENT

LAP30EULBA

CAUTION: RISK OF ELECTRICAL SHOCK. DO NOT PLUG INTO ANOTHER RELOCATABLE POWER TAP.

Parts List

Qty.	Part No.	Description		NO TV/MONITOR TO BE
1	LAP30EULBA	Cart Assembly, e-units at back
				USED ON TOP OF CART
	LAP30EULFR	Cart Assembly, e-units at front
Tools Required			MAXIMUM WEIGHT OF ACCESSORIES
Philips screwdriver			ON TOP OF CART: 25 LBS.

The socket-outlet to be installed near the equipment and to be easliy accessible.

Do not load each electrical unit with more than 12 A and do not load any recepticle with more than 12 A.

NOTE:

UNPLUG CART (TIMER) POWER CORD FROM POWER SOURCE BEFORE STARTING

E-UNIT REPOSITIONING: 'FRONT TO REAR'

LAP30EULFR

SEE DETAIL 'B'

bottom shelf

SEE DETAIL 'A'

Step 1

Open both front doors of cart to access E-Units. From underneath the bottom shelf, carefully unplug the power cords of the E-Units from the timer assembly (see Front View) and unclip the power cords from the 4 clips located at the bottom panel of the cart. Loosen the screw holding the E-Unit bracket assembly and remove all 4 bracket assemblies (see DETAILS 'A' and 'B').