Bretford LAP30EULBA manual Step, Timer vents & bracket must be

Timer vents & bracket must be
attached as shown.	Step 5

Install bracket to replacement timer with 2 nuts. Adjust timer dial to current time. If necessary, adjust timer charging times to match the original timer.

E-Unit bracket assembly

bottom flange- timer/bracket

Step 6

Install replacement timer/bracket assembly onto bottom, rear of cart with 2 screws. Feed the power cord from the timer out the grommeted hole (with cord wrap bracket located above cutout). Make sure timer face is aligned with rear panel cutouts. Swing the E-Unit back into position and reinstall bracket assembly.

Plug in the E-Units power cords into the bottom outlets of the timer assembly.