Step 4.
Place a citrus fruit half, cut side down, onto the Juice Cone and push down lightly onto the spikes
Step 5.
Grasp the Soft Grip Handle and slowly lower the Juicing Press Arm and press down firmly until the Fruit Dome is in contact with the fruit skin. The motor will automatically start and the Juicing Cone will begin to rotate. The juice will be extracted from the fruit and flow through the Juice Spout into the glass, The pulp and seeds will collect in the Stainless Steel Filter.
Step 6.
The 800 Class Citrus Press juices very quickly so each fruit half will be juiced in a few seconds. To automatically stop the motor, lift the Juicing Press Arm up and backwards to its extended position.
Step 7.
Remove the used fruit from the Juicing Cone. Empty excess pulp and seeds from Stainless Steel Filter as required.
Repeat Steps 3-7 to continue juicing.
NOTE: The Stainless Steel Filter should be emptied when full with pulp and seeds. The Filter can be emptied during juicing by switching the Citrus Press "OFF" at the On/Off button and carefully removing the Juicing Cone and Filter. Clean and replace Stainless Steel Filter and Juicing Cone before continuing to juice.
Do not allow the Stainless Steel Filter to overfill as this may prevent correct operation or damage the unit.
12 | OPERATING YOUR BREVILLE 800 CLASS CITRUS PRESS | OPERATING YOUR BREVILLE 800 CLASS CITRUS PRESS | 13 |
|
|
|
|
