Breville 800CP brochure ASSEMBLING YOUR BREVILLE 800 CLASS CITRUS PRESS, Step

ASSEMBLING YOUR BREVILLE 800 CLASS™ CITRUS PRESS

Step 1.

Pull the Juicer Press Arm up and backwards, away from the Motor Base, until fully extended.

Step 2.

Place the Juice Collector onto the Drive Shaft on top of the Motor Base. Ensure the Juice Spout fits into the semi-circular groove

at the front of the Motor Base.

Step 3.

Insert the selected Stainless Steel Filter (fine or coarse) into the Juice Collector, aligning the indent with arrow in the bottom of the Filter over the corresponding tab with arrow in the Juice Collector. Use the Coarse Filter for maximum pulp content in the juice and the Fine Filter to decrease the pulp content in the juice.

Step 4.	Step 5.
Place the Juicing Cone onto the Drive Shaft	Insert the Fruit Dome onto the underside of the
and press down lightly to lock the Cone	Juicing Press Arm by aligning the tab on top of
into position.	the Fruit Dome with the hole in the Juicing Press
	Arm. Hold onto the Juicing Press Arm and press
	the Fruit Dome up and backwards until the
	Dome locks into position. Note: The Fruit Dome
	is keyed, and can only be inserted in one way
	(this will ensure that it does not rotate
	through operation).

Step 6.

Ensure the Anti-drip Juice Spout is pushed down into the pouring position.

Step 7.

Place a suitable sized glass or jug underneath the Juice Spout.

8 ASSEMBLING YOUR BREVILLE 800 CLASS CITRUS PRESS ASSEMBLING YOUR BREVILLE 800 CLASS CITRUS PRESS 9