Breville BBL550XL /B manual Plug the power cord into a 110 / 120V power outlet

Operating your Breville Hemisphere Blender continued

The Breville Hemisphere Blender features a patented assist lid. This allows the lid to fit tightly onto the blender pitcher, avoiding displacement during operation. The ring pull design allows the user to easily remove the lid with a simple leverage action. (See Fig 1)

Note

Fig 1

Step 5.

Plug the power cord into a 110 / 120V power outlet.

Step 6.

Press the ‘Power’ button on the far left of the control panel to turn the blender on. The ‘Power’ button will illuminate and flash.

Do not fill the blender pitcher above the ‘MAX’ line. When the blender pitcher is filled at or near the ‘MAX’ line place one hand on the blender lid to avoid displacement of the lid during operation.

Note

Step 7.

Select the required speed (1 to 4) by pressing the corresponding speed button. The blender will start to operate and the selected speed button will illuminate. The ‘Power’ button will illuminate and cease to flash. The ‘Stop’ button will illuminate and flash.

Operate the blender only for the appropriate amount of time required – do not over process.

Note

Step 8.

When 60 seconds is reached, the blender will automatically cease to operate and the selected speed button and ‘Stop’ button illumination will go out. The ‘Power’ button will illuminate and flash.

•The ikon Blender will automatically stop blending after 60 seconds. This is a safety feature.

•To stop blending at any time, press the ‘Stop’ button or the selected speed button. The ‘Power’ button can also be pressed, but this will also turn the appliance off and all illuminations will go out.

•The speed can be changed at any time during the blending process. Each time a new speed is selected its button will illuminate and the previous speed button illumination will go out.

•The maximum amount of ice cubes the blender can blend at any one time is 1 standard ice tray or 9 oz. Use Speed 2/Mix.

Note

Step 9.

For ingredients that require short bursts of power, select the ‘AUTO PULSE’ function. The ‘AUTO PULSE’ button will illuminate and remain illuminated while the button is pushed. Press the ‘AUTO PULSE’ button in short bursts until blending is complete.

Use the ‘AUTO PULSE’ button when the food that is being processed is too thick or coarse to circulate within the blender pitcher.

Note

Step 10.

The Breville ikon Hemisphere Blender features an additional 'SMOOTHIE' function. This is a pre- programmed cycle which automatically adjust the blending time and speeds to optimize blending results. Select the required function by pressing the corresponding function button. The blender will start to operate and the selected function button will illuminate. The ‘Power’ button will illuminate and cease to flash. The ‘Stop’ button will illuminate and flash. When the programmed cycle has finished, the blender will automatically cease to operate and the function button and ‘Stop’ button illumination will go out. The ‘Power’ button will illuminate and flash.

NEVER PLACE ANYTHING OTHER THAN FOOD AND LIQUIDS IN THE IKON BLENDER WHILE THE MOTOR IS RUNNING.

8 9