Hitachi 32LD380TA Troubleshooting table / Specifications, Symptom, Possible solution, Page

32LD380TA

Troubleshooting table / Specifications

Troubleshooting table

Please check the following items, before you request for service.

	Symptom	Possible solution	Page
No picture, no sound		Switch on the set.
		Check the 100~240 V wall outlet.
		Select appropriate input mode.	18
No reception		Preset the station without using the AV cable.
		Press 1 on the remote control.	12
		Connect the antenna.
			12
		Check your antenna.
The TV switches off with		This is normal.	23
missing antenna input signal		15 minutes after the antenna signal has disappeared,
		the set will change to standby.
In	menu, TUNING-line	The unit is set to AV mode. Press 1 on the remote	20
can not be selected.		control.
Wrong Colours		Colour and Brightness errors can occur when the
		viewing angle / ambient air temperature (see technical
		specifications) are exceeded.

ENGLISH

Specifications

Color System:

Frequency Range:

Power Supply:

Power Consumption:

LCD:

HDMI input:

Output Power: Surrounding temperature:

Operating Humidity:

Dimensions:

Weight:

Accessories:

PAL/SECAM/NTSC 1~S6, S7~S36, S37~E69 AC 100~240V, 50/60Hz Operation: approx. 170W Stand by: approx. 1W 31.5" TYPE (80 cm visible)

TFT low-glass Active Matrix Colour LCD, 1366 x 768 Pixel Brightness: 500 cd/m2

View Lange:Left/Right: 85 degree Up/Down: 85 degree HDMI compliant (type A connector)

HDCP compliant Suggested scan rates:

PAL: 576i/576p/720p/1080i

NTSC: 480i/480p/720p/1080i

HDMI Audio: 2-channel PCM

32/44.1/48 kHz sampling frequency 16/20/24 bits per sample

10W x 2 (MAX) Operation: 5°C ~ 40°C Storage: –20°C ~ 60°C Less than 80%RH

82.2(W) x 60.4(H) x 33.3(D) cm approx. 19 kg (w/o Accessories)

2batteries (AAA/R03/UM-4) Remote control unit

AC cord

Weight and dimensions are approximate. Because we continually strive to improve our products we may change specifications and designs without prior notice.

41

3V90441A [E] P40-BACK 41 HITACHI

31/10/05, 9:22 AM