Hitachi 32LD380TA user manual To connect the LCD television to a HDMI or a DVI device, Hitachi

Models: 32LD380TA

1 44
Download 44 pages 58.4 Kb
Page 18
Image 18
To connect the LCD television to a HDMI or a DVI device

32LD380TA

Connections to other equipment

To connect the LCD television to a HDMI or a DVI device

The HDMI input receives digital audio and uncompressed video from a HDMI device or uncompressed digital video from a DVI device.

When you connect to a DVI device with a HDMI-to-DVI adapter cable, it transfers only the video signal. Separate analog audio cords are required.

Rear lower of the

LCD television

HDMI, the HDMI logo and High- Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

NOTE:

Audio cord (not supplied)

HDMI - to - DVI adapter cable

 

(HDMI type A connector)

 

(not supplied)

 

To DVI output

or

HDMI cable (type A connector)

 

(not supplied)

 

To HDMI out

 

You must choose an appropriate setting for each connection 36 .

To connect the LCD television to a PC (Personal Computer)

Before you connect this LCD television to your PC, change the adjustment of your PC’s Resolution and Refresh rate (60 Hz).

Connect one end of a (male to male) VGA cable to the video card of the computer and the other end to the VGA connector PC MONITOR on the back of the LCD television. Attach the connectors firmly with the screws on the plug. In case of a Multimedia computer, connect the audio cable to the audio output of your Multimedia computer and to the AUDIO connector of the PC AUDIO IN jack of the LCD television. Switch on the computer. The LCD television can operate as the computer monitor.

Rear lower of the LCD television

To PC IN

To PC AUDIO

IN jack

Audio cord (not supplied)

VGA cable (not supplied)

Note:

Monitor Television modes

 

MODE

Resolution

Refresh rate

VGA

640x480

60Hz

VGA

720x400

70Hz

WVGA

848x480

60Hz

SVGA

800x600

60Hz

XGA

1024x768

60Hz

WXGA

1280x720/768

60Hz

WXGA

1360x768

60Hz

If there is no video signal from the computer when the unit is in PC mode, “NO SYNC. SIGNAL” will appear on the TV-screen for approx. 10 seconds.

16

3V90441A [E] P13-17

16

HITACHI

 

31/10/05, 9:21 AM

Page 18
Image 18
Hitachi 32LD380TA user manual To connect the LCD television to a HDMI or a DVI device, Monitor Television modes, Hitachi