PROGRAMMING THE WATER VOLUME | RESET TO FACTORY SETTINGS |
1 |
|
|
|
|
|
|
|
| 12 | 3 |
|
| 11 |
|
|
| 1 |
|
|
| |
|
|
|
|
|
| |
|
|
|
|
| >4 sec | |
|
|
| 2 |
|
|
|
|
|
|
|
|
|
|
Factory settings are: | EN | |
1. | Lungo, Espresso, Ristretto controls | |
| 110 ml / 3.7 oz, 40 ml / 1.35 oz., |
|
| 25 ml / 0.84 oz. |
|
2. | Automatic Off mode after |
|
Any control can be programmed. Completely open the slider and insert a Nespresso capsule.
Touch and hold the control while closing the slider. Release control when desired volume is reached. The other 2 controls flash for confirmation. Water volume level is now stored in the control used during programming.
Press and hold the Espresso & Lungo controls together for at least 4 sec. The other control flashes for confirmation.
9 minutes. |
3. Most frequently chosen cup size |
as Espresso control at 40 ml / |
1.35 oz. |
EMPTYING THE SYSTEM before a period of
11
21
To note, the machine remains blocked for 10 minutes after emptying! Remove the water tank.
Place a container under the coffee outlet.
1
| 2 |
6 sec | 1 |
| 3 |
Open slider. Press and hold the Ristretto
&Lungo controls together for at least
6 sec. The other control flash for con- firmation. Then close the slider to start procedure.
13 |
Power OFF |
Machines turns to Off mode automati- cally when empty.
9
