care & CLEANING
Always ensure that the juicer is turned off and the power cord is unplugged from the power outlet before cleaning, disassembling or assembling and storing the appliance.
1.Immediately after each use, use the provided nylon brush to thoroughly clean the fine mesh holes of the filter basket. Brush the inside and outside of the filter basket under running water, holding it up towards the light to ensure the fine mesh holes are not blocked.
If the holes are blocked, soak the filter basket in hot water with 10% lemon juice to loosen the blocked holes.
TIP
If the Filter Basket cannot be cleaned immediately after use, soak the Filter Basket in hot soapy water immediately after juicing is complete. If pulp is left to dry on the Filter Basket, it may clog the fine mesh holes, thereby lessening the effectiveness of the juicer. Do not soak the Filter Basket in bleach.
2.Wash the filter bowl surround, scraper wiper, juicing screw, pulp container and juicing jug in warm soapy water with the provided small nylon brush or a soft cloth. Rinse and dry thoroughly.
NOTE
Do not place any part of the juicer in the dishwasher.
TIP
Discoloration of the plastic parts may occur with brightly colored fruit and vegetables. To help prevent this, wash parts immediately after use. If discoloration does occur, the plastic parts can be soaked in 10% lemon juice and water or they can be cleaned with a non abrasive cleaner. Do not soak the Filter Basket in bleach.
3.Wipe the motor base with a soft damp cloth and dry thoroughly. Do not use abrasive scouring pads or cleaners when cleaning the motor base as these may scratch the surface. Wipe any excess food particles from the power cord.
4.There is a rubber ring located on the motor base, where the filter bowl surround is placed upon assembly. This ring can be removed for “hand wash only” cleaning as necessary. Be sure to replace the ring before next use.
18
