Breville BKE820XL, the IQ Kettle manual operating YOUR BREVILLE product

operating YOUR BREVILLE product

6.If the KEEP WARM function has been selected, the KEEP WARM button surround will remain illuminated in red, the selected temperature button surround will remain illuminated in white, and the kettle will continue to cycle on and off for 20 minutes. If the kettle is removed from the power base during the KEEP WARM function the kettle will automatically switch off.

7.If further heating of the kettle is not required, unplug the power cord and empty the water from the kettle. Replace the kettle onto the power base and close the lid.

NOTE

The default temperature setting of the kettle when switched on at the power outlet is 212°F.

When the kettle is unplugged at the power outlet and plugged back in, it will automatically default to the 212°F temperature setting.

When the kettle remains plugged in at the power outlet and different temperature settings have been selected, the kettle will default to the last selected temperature setting.

NOTE

Through regular use over time, scale build-up in the kettle can affect the performance and the life of the kettle. Lime and phosphate are common forms of scale that can damage your kettle.

Lime scale, a harmless mineral, comes in the appearance of white-colored or rusty looking build up on the inner walls of the kettle.

Phosphate scale can’t be seen, however, it can cause the water to appear cloudy when heated.

To prevent scale from damaging your kettle, ensure that the kettle is de-scaled regularly – refer to Care and Cleaning (Page 17). To avoid scale build-up, empty the kettle after use and do not allow water to stand in the kettle overnight.

WARNING

Do not open the lid during and after operation. This may result in hot or boiling water splashing from the kettle. Pour all the hot water from the kettle before opening the lid to refill.

NOTE

This kettle must be used only with the power base supplied. Use caution when pouring water from your kettle, as boiling / heated water and steam will scald. Do not pour the water too quickly.

NOTE

Always fill the kettle to between the minimum (500 MIN) and maximum (1800 MAX) marks on the water window on the kettle. Too little water will result in the kettle switching off.

Filling above the maximum mark on the water window of the kettle may result in boiling / heated water splashing from the kettle.

14

BKE820XL_IB_G13.indd 14

16/08/13 4:34 PM