CARE, CLEANING
& STORAGE
Care, Cleaning & STORAGE
Always switch off at the power outlet and unplug the appliance from the power outlet before cleaning.
Removable filter
The kettle features a removable mesh filter to remove scale deposits for cleaner water. To clean the scale deposits from the filter, remove the filter by opening the lid and sliding the filter up and out of the kettle.
The filter can be cleaned by placing under running hot water and rubbing with a cleaning cloth or brush.
To replace the filter, simply slide the filter down into the slot behind the spout of the kettle and push back into position.
NOTE
The filter could become damaged with time, so please check regularly and replace if found damaged.
NOTE
The concealed element in the base of the kettle is made from high quality stainless steel. Any brown stains appearing are the result of mineral deposits and are not rust.
Removal of mineral deposits
Mineral deposits in tap water may cause the kettle interior and water window to discolour over time.
We recommend the use of a proprietary
Breville Kettle Cleaner
Directions for use:
1.Add 125ml of Breville Kettle Cleaner to 2 litres of water.
2.Fill kettle with mixture on a protected surface.
3.Bring kettle to boil and let stand for 30 minutes.
4.Clean spout by using a cloth dampened with Breville Kettle Cleaner, rub well. Then wipe off.
5.Bring the kettle to boil for a second time, then empty solution.
6.Fill kettle with fresh water and bring to the boil, discard boiled water. Now your kettle is ready to make your next cup of tea or coffee.
NOTE
To purchase the Breville Kettle Cleaner, contact Breville Customer Service or visit www.breville.com.au.
Alternatively:
1.Fill the kettle until ²/³ full with 1 part vinegar and 2 parts water. Boil and allow to stand overnight.
2.Empty the solution from the kettle. Fill the kettle with clean water, bring to boil and discard the water.
3.Repeat step 2 and the kettle will be ready for use.
17
