OPERATING YOUR BREVILLE Milk Café™
USING THE ‘COLD STIR’ SETTING
By selecting the ‘Cold Stir’ setting on the temperature dial, you can froth cold or hot milk without heating.
The ‘Cold Stir’ setting is ideal for making cold beverages or blending ingredients.
The ‘Cold Stir’ setting will operate for 60 seconds.
NOTE
A different frothing result may be achieved depending on the ingredients added.
Experiment with different milk options, ingredients and frothing discs to achieve the desired result.
NOTE
Avoid adding sugary powders using ‘Cold Stir’ setting. Toppings and syrups work best.
Adding Ingredients
Using the measuring cap, gradually add ingredients a few minutes after the stirring cycle has commenced, allowing the milk to warm first.
Always add ingredients slowly and in small quantities. Adding ingredients too quickly may cause the frothing disc to dislodge or stop spinning.
Safety Features
Standby
After 30 seconds of non use the milk frother will enter standby mode and the button surround will cease to illuminate.
To activate the milk frother out of standby mode, press the START STOP button.
Boil Dry Protection
The milk frother will automatically cease to operate if the jug overheats. This can be caused if the jug is empty, if liquid is below the MIN measurement marking, or after consecutive uses. Wait approximately 5 minutes for the milk frother to cool down or fill the jug with water for faster cooling. Once adequately cooled, you will be able to activate the milk frother and recommence frothing.
Thermal Fuse Protection
This feature protects the milk frother in case of major fault.
The appliance will no longer be able to operate. Immediately cease use and return appliance to Breville.
Call Breville Customer Service on Ph: 1300 139 798 (Australia) or Ph: 0800 273 845 (New Zealand).
13
