CARE, CLEANING AND STORAGE

Care and cleaning

1. Switch the toaster off at the power outlet and

NOTE: DO NOT CLEAN WITH METAL

SCOURING PADS. PIECES CAN

then remove the power plug from the power

BREAK OFF THE PAD AND TOUCH

outlet. Allow the toaster to cool completely

ELECTRICAL PARTS CREATING AN

before cleaning.

2. To clean any crumbs from the toaster, remove

ELECTRIC SHOCK HAZARD.

 

the crumb tray, located under the control

 

panel at the front of the toaster, by pulling it

 

outwards. Empty and replace the crumb tray

 

before using the toaster again. Replace the

 

crumb tray by sliding it inwards until it locks

 

into position.

 

3.To remove any additional crumbs, turn the toaster upside down over a bin and shake crumbs free.

4.Wipe the outside of the toaster with a slightly dampened soft cloth then polish with a soft dry cloth to dry completely.

STORAGE

Switch the toaster off at the power outlet and remove the power plug from the power outlet. Allow the toaster to cool completely before storing. Follow the directions for cleaning and store in an upright position on a flat surface on a bench top or in an accessible cupboard. Do not store anything on top of the toaster.

WARNING: Do not use the toaster without the slide-out crumb tray in position. Do not allow crumbs to build up in the crumb tray. Failure to clean the crumb tray regularly may result in a fire hazard.

18 CARE, CLEANING AND STORAGE

Page 18
Image 18
Breville BTA820, BTA840 manual Care and cleaning, Storage