Breville BTA820XL manual Auto ‘LIFT & LOOK’ button, To select this feature, ‘DEFROST’ button

Operating your Breville 2-Slice Smart Toaster™ continued

The inside of the bagel must always face inwards towards the middle of the toaster. The toaster will revert back to the bread toast setting after each toasting cycle, unless the ‘BAGEL’ setting is activated again.

Note

7.10 seconds before the end of the toasting cycle, the ‘LIFT & LOOK™’ button will cease to illuminate and the toast will automatically rise from the toasting slots.

8.The toast ready signal will sound and the ‘TOAST/CANCEL’ button will illuminate white for up to 30 seconds, ready for next toasting cycle. The toasting progress LED’s will re-illuminate to the selected setting.

Auto ‘LIFT & LOOK™’ button

This feature automatically raises the bread carriage without canceling or resetting the cycle. You can view toasting progression during the toasting cycle and, if necessary, cancel the cycle with the ‘TOAST/CANCEL’ button when the desired toast color is achieved.

To select this feature:

1. The ‘LIFT & LOOK™’ button will illuminate white

‘DEFROST’ button

This feature activates additional toasting time required to toast frozen bread.

To toast frozen bread:

1.Place the bread into the toasting slots.

2.Select the desired browning setting.

3.Press the ‘DEFROST’ button which will illuminate white. The toasting time will automatically increase, but will not illuminate more of the toasting progress LED‘s. It will only increase the time each LED flashes for.

If toasting a frozen bagel, follow steps 1-3 above, then press the ‘BAGEL’ button which will illuminate white.The toasting time will automatically adjust to account for the defrosting time and the bagel toasting time.

Note

4.Press the ‘TOAST/CANCEL’ button which will illuminate red. The bread will automatically lower into the toasting slots.

5.The ‘LIFT & LOOK™’ button will illuminate white allowing you to check on the toasting progression and, if necessary, cancel the cycle with the ‘TOAST/CANCEL’ button when the desired toast color is achieved.

6.As the additional toasting time nears completion, the ‘TOAST/CANCEL’ button will flash.

The toaster will revert back to the bread toast setting after each toasting cycle, unless the ‘DEFROST’ button is activated again.

Note

during the toasting cycle. You can select this

feature anytime during this period to view the

toasting progression. If selected, the ‘LIFT &

LOOK™’ button will flash. The flashing toasting

progress LED will cease to flash indicating that

the selected toasting cycle time has temporarily

been disrupted (without canceling or resetting

the cycle). When the ‘LIFT & LOOK™’ cycle is

finished, the toasting cycle will re-commence,

indicted by the flashing toasting progress LED.

2. As the toasting cycle nears completion, the

‘TOAST/CANCEL’ button will flash.

3. 10 seconds before the end of the toasting cycle

the ‘LIFT & LOOK™’ button will cease to

illuminate and the toast will automatically rise

from the toasting slots.

4. The toast ready signal will sound and the

‘TOAST/CANCEL’ button will illuminate white

for up to 30 seconds, ready for the next

toasting cycle.

10 11