‘TOAST/CANCEL’ button, ‘A BIT MORE’ button

Operating your Breville 2-Slice Smart Toaster™ continued

6.As the toasting cycle nears completion, the ‘TOAST/CANCEL’ button will flash.

7.10 seconds before the end of the toasting cycle, the ‘LIFT & LOOK™’ button will cease to illuminate and the toast will automatically rise from the toasting slots.

8.The toast ready signal will sound and the ‘TOAST/CANCEL’ button will illuminate white for up to 30 seconds, ready for the next toasting cycle. The toasting progress LED’s will re-illuminate to the selected setting.

The Breville 2-Slice Smart Toaster™ features an ‘A BIT MORE™’ button which can be selected before or after the toasting cycle. This automatically lowers the bread carriage for additional toasting time so you can brown your toast ‘A BIT MORE™’ until the desired color is achieved.

Note

IN THE UNLIKELY EVENT THAT BREAD, BAGELS OR MUFFINS BECOME JAMMED IN THE TOASTING SLOTS, ALL THE BUTTONS AND LED’S ON THE TOASTING PROGRESS INDICATOR WILL FLASH. SWITCH THE TOASTER OFF AT THE POWER OUTLET, REMOVE THE PLUG AND ALLOW THE TOASTER TO COOL COMPLETELY BEFORE CAREFULLY EASING OUT THE BREAD. TAKE CARE NOT TO DAMAGE THE ELEMENTS.

‘TOAST/CANCEL’ button

•This button will illuminate white for up to 30 seconds when the appliance is turned on. If no buttons are selected or the browning control slide is not moved after 30 seconds, the toaster will revert to standby mode and the illumination will go out.

•Press this button once to lower the bread carriage and start the toasting process. The button will illuminate red.

•Press this button during operation to cancel the toasting process or any other function. The button illumination will change from red to white and stay illuminated for up to 30 seconds.

‘A BIT MORE™’ button

This feature can be selected before or after the toasting cycle. It automatically lowers the bread carriage for additional toasting time so you can brown your toast ‘A BIT MORE™’ until the desired color is achieved.

If this feature is selected:

1.The ‘A BIT MORE™’ button will illuminate white. The bread carriage will automatically lower and begin the additional toasting time. The third toasting progress LED will flash and start to count down the additional browning time.

2.The ‘TOAST/CANCEL’ button will illuminate red.

3.The ‘LIFT & LOOK™’ button will illuminate white allowing you to check on the toasting progression and, if necessary, cancel the cycle with the ‘TOAST/CANCEL’ button when the desired toast color is achieved.

4.As the additional toasting time nears completion, the ‘TOAST/CANCEL’ button will flash.

5.10 seconds before the end of the toasting cycle, the ‘LIFT & LOOK™’ button will cease to illuminate and the toast will automatically rise from the toasting slots.

6.The toast ready signal will sound and the ‘TOAST/CANCEL’ button will illuminate white for up to 30 seconds, ready for next toasting cycle. The toasting progress LED’s will re-illuminate to the selected setting.

‘BAGEL’ button

This feature activates additional heat to the centre heating elements to cook the insides of your cut bagel without burning the outside.

To toast bagels:

1.Place the cut bagel into the toasting slots with the inside of the bagel facing inwards toward the middle of the toaster.

2.Select the desired browning setting.

3.Press the ‘BAGEL’ button which will illuminate white. The heating elements will automatically adjust. The toasting time will also automatically increase, but will not illuminate more of the toasting progress LED‘s. It will only increase the time each LED flashes for.

4.Press the ‘TOAST/CANCEL’ button which will illuminate red. The bagel will automatically lower into the toasting slots.

5.The ‘LIFT & LOOK™’ button will illuminate white allowing you to check on the toasting progression and, if necessary, cancel the cycle with the ‘TOAST/CANCEL’ button when the desired toast color is achieved.