KNOW YOUR BREVILLE ESPRESSO/CAPPUCCINO MAKER
OPERATING YOUR BREVILLE ESPRESSO/CAPPUCCINO MAKER
3 position brew/steam selector control
Water tank cap with pressure indicator button
Cup warming plate
Power ‘on’ and ‘heating’ lights
Steam tube and nozzle with removable cappuccino froth enhancer
Filter holder and 2 stainless steel filters
Removable drip tray
Bonus espresso cup set (not shown)
Cleaning tool (not shown)
BEFORE USING YOUR ESPRESSO/CAPPUCCINO MAKER
Wash the filter holder, stainless filters and frothing jug in mild detergent and water. Rinse and dry thoroughly.
It is recommended to carry out a complete brewing operation with cold water but without any coffee before making your first espresso or cappuccino (see Brewing Coffee). By doing so, any residual dust left inside the Espresso/Cappuccino Maker will be removed.
PRE-WARMING CUPS
For optimal coffee temperature, use the cup warming plate on top of the appliance to
fig 1
•Ensure the Pressure Indicator Button on the Water Tank Cap has dropped down and is flush with the top of the cap.
•Unscrew the water tank cap and pour cold water into the tank. Fill to 5mm below the visible water pipes (Fig 1). Do not fill to the top of the tank or there will not be enough area to generate steam.
•Screw the water tank cap back on top of the water tank, making sure it is secured firmly before operating the appliance.
HOW TO MAKE AN ESPRESSO
Filling the water tank
•Switch the power off at the power outlet and remove the plug.
•Ensure the Brew/Steam selector control is in the ‘STANDBY’ position. The ‘STANDBY’ position is located on the centre of the selector control.
Do not use warm or hot
water to fill the water tank.
Water tank with hinged cover | Stainless steel frothing jug | Coffee measuring spoon |
6 |
|
|
DO NOT POUR WATER INTO THE WATER TANK WHILE THE SELECTOR |
|
CONTROL IS IN THE BREW OR STEAM POSITION. | 7 |
|
