7
CARE AND CLEANING
Always switch the appliance to off, switch
the power off at the power outlet and then
remove the plug before cleaning. Never
immerse the Urn controls or cord in water,
or allow moisture to come in contact with
these parts.

REMOVAL OF MINERAL DEPOSITS.

Mineral deposits in tap water may cause the
Urn interior to discolour. This may be
removed by using a commercial kettle
descaler which is available from most
leading supermarkets, departments and
hardware stores.

TO CLEAN THE POLISHED

EXTERIOR.

The stainless steel surface may be wiped
over with a damp cloth and polished with a
soft dry cloth.
6
SAFETY BOIL DRY PROTECTION
The Urn is fitted with a safety device which
protects against overheating should the
appliance be operated with insufficient water
or has boiled dry. If this occurs, the Urn will
stop heating. Both the red and orange lights
will turn off.
Switch the appliance to off, switch the
power off at the power outlet and allow the
Urn to cool. Press the safety reset button
under the base before refilling (fig 7). The
safety device will then be reset and the Urn
is ready for use.
Fig 7
Do not use chemical, steel
wool, or abrasive cleaners to
clean the outside of the Urn.
☛
NOTE!