Briggs & Stratton 01654, 01653, 01892, 01893 manual

Portable Generator

120 Volt AC, 30 Amp Locking Receptacle

Use a NEMA L5-30 plug with this receptacle. Connect a

3-wire cord set rated for 125 Volts AC at 30 Amps to the plug (Figure 8).

Figure 8 — 120 Volt AC, 30 Amp, Locking Receptacle

3-Wire Cord Set

NEMA L5-30

Neutral

120V

Hot

Ground (Green)

Use this receptacle to operate 120 Volt AC, 60 Hz, single phase loads requiring up to 3,600 watts (3.6 kW) of power at 30 Amps.The outlet is protected by a push-to-reset circuit breaker.

120 Volt AC, 20 Amp, Duplex Receptacles

Each duplex receptacle (Figure 9) is protected against overload by a push–to–reset circuit breaker.

Figure 9 — 120 Volt, 20 Amp Duplex Receptacle

Use each receptacle to operate 120 Volt AC, single–phase, 60 Hz electrical loads requiring up to 2,400 watts (2.4 kW) at 20 Amps of current. Use cord sets that are rated for 125 Volt AC loads at 20 Amps (or greater).

COLD WEATHER

OPERATION

Under certain weather conditions (temperatures below 40°F [4°C] and a high dew point), your generator may experience icing of the carburetor and/or the crankcase breather system.

Build a structure that will enclose three sides and the top of the generator:

1.Make sure entire muffler-side of generator is exposed. Note that your generator may appear different from that shown in Figure 10.

Figure 10 — Permanent Cold Weather Shelter

Wind

2.Ensure a minimum of two feet clearance between open side of box and nearest object.

3.Face exposed end away from wind and elements.

4.Enclosure should hold enough heat created by the generator to prevent problems.

DANGER

Running generator gives off carbon monoxide, an odorless, colorless, poison gas.

Breathing carbon monoxide will cause nausea, fainting or death.

•Operate generator ONLY outdoors.

•Keep at least 2 feet of clearance on all sides of generator for adequate ventilation.

•DO NOT operate generator inside any building or enclosure, including the generator compartment of a recreational vehicle (RV).

•Remove generator from shelter when temperature is above 40°F [4°C].

01654, 01653, 01892, 01893, 01653, 01653, 01654, 01892, 01893 specifications

Briggs & Stratton is a renowned name in the power equipment industry, particularly recognized for its reliable small engines used in various applications. The model numbers 01653, 01654, 01892, and 01893 represent a series of advanced engines that embody the innovation and quality synonymous with the Briggs & Stratton brand.

One of the main features of these models is their robust design, which ensures durability and longevity even under demanding conditions. Engineered for easy operation, these engines are ideal for both residential and commercial applications, such as lawn mowers, pressure washers, and generators.

The 01653 and 01654 models are equipped with overhead valve technology, providing enhanced fuel efficiency and reduced emissions. This allows users to operate their equipment more sustainably while still experiencing powerful performance. Additionally, both models feature a convenient recoil starter, making them easy to start with minimal effort.

Moving on to the 01892 and 01893 models, these engines incorporate advanced cooling systems designed to prevent overheating during extended use. This is particularly beneficial for users who rely on their equipment for long periods, as it enhances performance and reliability. The 01892 model also boasts a unique float feed carburetor system, which ensures consistent fuel delivery, optimizing engine performance regardless of the application's rigor.

All four models are designed with user-friendliness in mind. They come equipped with simple maintenance features, allowing users to perform routine checks and oil changes with ease. The easy-access air filters contribute to better engine performance and longevity while being straightforward to replace.

Furthermore, Briggs & Stratton engines are field-tested for their reliability and efficiency. Users can trust that every one of these models delivers consistent power and performance, which is critical for completing tasks efficiently.

In conclusion, the Briggs & Stratton 01653, 01654, 01892, and 01893 models stand out due to their advanced technologies, user-friendly features, and robust construction. They represent the company's commitment to providing dependable engines that meet the varied needs of professionals and homeowners alike. Whether for residential or commercial use, these models continue to set standards in the power equipment industry.

Briggs & Stratton 01654, 01653, 01892, 01893, 01653, 01654, 01892, 01893 Cold Weather Operation

Models: 01654, 01653, 01892, 01893 01653 01653, 01654, 01892, 01893