Portable Generator

ASSEMBLY

Your generator requires some assembly and is ready for use after it has been properly serviced with the recommended oil and fuel.

If you have any problems with the assembly of your generator, please call the generator helpline at

1-800-743-4115. If calling for assistance, please have the model, revision, and serial number from the data tag available.

INSTALL WHEEL KIT

NOTE: If your unit is supplied with a 10” wheel kit use the following instructions. If your unit is supplied with an 8” wheel kit use the instructions on page 6.

NOTE: While the wheel kit is designed to greatly improve the portability of your generator, it is not intended for over-the-road use.

You will need a socket wrench with 1/2" or 13mm sockets and a needle-nose pliers to install this kit.

Install the 10” Wheel Kit as Follows

1.Place the bottom of the generator cradle on a flat, even surface.Temporarily place unit on blocks to ease assembly.

Figure 1 — Install Wheel Kit

2.Slide axle through both axle mounting brackets on cradle frame, as shown in Figure 1.

3.Slide a wheel over the axle.

NOTE: Be sure to install both wheels with the air pressure valve on the outboard side.

4.Place the e-ring onto the groove in the axle.You may add the flat washer if desired.

NOTE: Use retaining pins instead of e-clip, if applicable.

5.Place one end of the needle nose pliers on the bottom of the axle and the other end of the pliers on top of the e-ring. Seat the e-ring by pressing the pliers closed.

6.Repeat step 3 through 5 to secure second wheel.

7.Remove the temporary blocks.

8.Attach the vibration mounts to the support leg with 30mm capscrews and lock nuts.

9.To aid support leg assembly, rest generator on cradle, engine end down. Remove the existing hardware from the left unit vibration mount with 13mm wrench. Use the same hardware to attach the support leg.

10.Attach the other side of the support leg with a 20mm cap screw and lock nut. Rest generator on wheels and support leg.

Cap Screw

Hex Nut

Handle Assembly

Use existing hardware

to attach left side of Hex Nut support leg to unit

Support Leg

Vibration Mount

Hex Nut

Cap Screw

Wheel

Flat Washer

Axle

Cap Screw

E-Ring

5

Page 5
Image 5
Briggs & Stratton 01653, 01654, 01892, 01893 owner manual Assembly, Install Wheel KIT, Install the 10 Wheel Kit as Follows

01654, 01653, 01892, 01893, 01653, 01653, 01654, 01892, 01893 specifications

Briggs & Stratton is a renowned name in the power equipment industry, particularly recognized for its reliable small engines used in various applications. The model numbers 01653, 01654, 01892, and 01893 represent a series of advanced engines that embody the innovation and quality synonymous with the Briggs & Stratton brand.

One of the main features of these models is their robust design, which ensures durability and longevity even under demanding conditions. Engineered for easy operation, these engines are ideal for both residential and commercial applications, such as lawn mowers, pressure washers, and generators.

The 01653 and 01654 models are equipped with overhead valve technology, providing enhanced fuel efficiency and reduced emissions. This allows users to operate their equipment more sustainably while still experiencing powerful performance. Additionally, both models feature a convenient recoil starter, making them easy to start with minimal effort.

Moving on to the 01892 and 01893 models, these engines incorporate advanced cooling systems designed to prevent overheating during extended use. This is particularly beneficial for users who rely on their equipment for long periods, as it enhances performance and reliability. The 01892 model also boasts a unique float feed carburetor system, which ensures consistent fuel delivery, optimizing engine performance regardless of the application's rigor.

All four models are designed with user-friendliness in mind. They come equipped with simple maintenance features, allowing users to perform routine checks and oil changes with ease. The easy-access air filters contribute to better engine performance and longevity while being straightforward to replace.

Furthermore, Briggs & Stratton engines are field-tested for their reliability and efficiency. Users can trust that every one of these models delivers consistent power and performance, which is critical for completing tasks efficiently.

In conclusion, the Briggs & Stratton 01653, 01654, 01892, and 01893 models stand out due to their advanced technologies, user-friendly features, and robust construction. They represent the company's commitment to providing dependable engines that meet the varied needs of professionals and homeowners alike. Whether for residential or commercial use, these models continue to set standards in the power equipment industry.