SpeedClean™ 2000 PSI Pressure Washer

HOW TO USE YOUR PRESSURE WASHER

If you have any problems operating your pressure washer, please call the pressure washer helpline at 1-800-743-4115.

Pressure Washer Location

Pressure Washer Clearance

How to Start Your Pressure Washer

To start your pressure washer for the first time, follow these instructions step-by-step.This starting information also applies if you have let the pressure washer sit idle for at least a day.

1.Place pressure washer near an outside water source capable of supplying water at a flow rate greater than 2.9 gallons per minute and no less than 20 PSI at pressure washer end of garden hose.

WARNING

Exhaust heat/gases can ignite combustibles, structures or damage fuel tank causing a fire.

Keep at least 5 ft. (152 cm) clearance on all sides of pressure washer including overhead.

Place pressure washer outdoors. DO NOT place pressure washer where exhaust gas could accumulate and enter inside or be drawn into a potentially occupied building. Ensure exhaust gas is kept away from any windows, doors, ventilation intakes or other openings that can allow exhaust gas to collect in a confined area (Figure 6). Prevailing winds and air currents should be taken into consideration when positioning pressure washer.

WARNING

Running engine gives off carbon monoxide, an odorless, colorless, poison gas.

Breathing carbon monoxide will cause nausea, fainting or death.

Operate pressure washer ONLY outdoors.

Keep exhaust gas from entering a confined area through windows, doors, ventilation intakes or other openings.

DO NOT operate pressure washer inside any building or enclosure.

Figure 6 — Pressure Washer Clearance

Typical Pressure

Washer Shown

Exhaust Port

2.Check that high pressure hose is tightly connected to spray gun and pump. See “Preparing Pressure Washer for Use” for illustrations.

3.Make sure unit is in a level position.

4.Connect garden hose to water inlet on pressure washer pump.

CAUTION

DO NOT run the pump without the water supply connected and turned on.

Damage to equipment resulting from failure to follow this instruction will void warranty.

5.Turn ON water, point gun in a safe direction and squeeze trigger to purge pump system of air and impurities.

6.Attach nozzle extension to spray gun (Figure 7). Tighten by hand.

Figure 7 — Connect Nozzle Extension to Spray Gun

7.Engage trigger lock on spray gun trigger (Figure 8).

Figure 8 — Spray Gun with Trigger Lock Engaged

Trigger Lock

10

Page 10
Image 10
Briggs & Stratton 020238-0 HOW to USE Your Pressure Washer, Pressure Washer Location, How to Start Your Pressure Washer

020238-0 specifications

The Briggs & Stratton 020238-0 is a powerful and reliable generator that is designed to meet the needs of homeowners and professionals alike. This model stands out for its durability, efficiency, and advanced technology. Whether for outdoor activities, emergencies, or job sites, this generator is equipped to deliver consistent power when it is most needed.

One of the key features of the Briggs & Stratton 020238-0 is its robust engine. Powered by a reliable Briggs & Stratton engine, this generator provides dependable starting and performance. With a high-efficiency design, the engine ensures optimal fuel consumption while delivering ample power output. The generator can produce up to 5,000 running watts and 6,250 starting watts, making it suitable for running essential appliances and tools during power outages or outdoor events.

Another notable characteristic is the generator's compact and portable design. It features built-in wheels and a foldable handle, allowing for easy transport and storage. This portability makes the generator an excellent choice for camping, tailgating, or construction sites where power is required away from conventional power sources.

The Briggs & Stratton 020238-0 incorporates advanced safety features, including low-oil shutdown, which protects the engine from damage when oil levels are too low. Additionally, the generator is equipped with circuit breakers to prevent overloads and ensure safe operation. The user-friendly control panel features multiple outlets, including 120V and 120/240V options, allowing for versatile connectivity for various devices.

The generator also boasts a noise-reducing design, ensuring quieter operation compared to many other models in its class. This feature is particularly advantageous in residential areas or during nighttime use, where noise can be a concern.

In summary, the Briggs & Stratton 020238-0 is a well-rounded generator that combines power, portability, and safety. With its durable construction and advanced technologies, it serves as an invaluable tool for anyone in need of reliable electrical power. Whether for emergency backup or recreational use, this generator provides peace of mind and exceptional performance, making it an excellent investment for both casual users and professionals seeking a dependable power solution.